As i'm now well into the Toyota Transplant, it's time to get rid of some old stuff. If you're interested, make me an offer.

Strong 1275 MG Metro engine - (yes it's not a 1380) c/w all ancillaries, good box, all new service items (<300 miles) Lucas electronic ign. HIF44 carb with minisport inlet and stubstack. New head gasket (Head not torqued down I only opened it up to check cc's). Lazy clutch, but new slave cyl. PROVISIONALLY SOLD
Modified Maniflow 3 into 1 exhaust manifold Large Bore modded to suit Coupe (Or Rossa I suppose) SOLD
Handbrake cover GRP in good order.
Set of 5 12" Wolfrace superslots with tyres. Circa 1976 in good order.
Std Coupe dash - been hacked a bit for more dials than would ever be needed. SOLD
Lots of Smiths dials including speedo, tacho, fuel, amps etc. TACHO SOLD
Steering wheel in ok cond.
Custom bracket that holds spare wheel in place - very nicely made.
Full wiring loom front to back. Everything works(ed) Multi coloured binding but in vgc. SOLD
Su style elec fuel pump.
Early style gearchange with rear support inside tunnel (Rod change box) SOLD
And loads of other bits not Coupe specific.

Hi Pantera , hope the toyota installation is going to plan?
Anyway I would be interested in some of the surplus parts you are selling , if you would be able to sed them to N Ireland?
The parts i would be interested in are the exhaust manifold, if you recon it will fit a rossa , the gearchange, the dash (how may clocks are too many???) and the wiring loom. Many thanks , Gorf

hey fella

Any chance of getting some pictures of the alloys and gauges...and what exact gauges do u have?
cheers

These are the alloys as fitted to my Coupe a few years ago

They're the standard wolfrace superslots of the era. 3 just legal michelin MX's and 2 as new Continentals. Tyres are 155's. Not got all the nuts, and the ones I have got are pretty scabby. Wheels in very good order - virtually no damage, but have oxidised a bit so could do with a polish.
They aren't cheap - 4 without tyres went on ebay last week for £97 - so i'm asking £120 for all 5 plus shipping.

Dials: Tacho already has dibs. Speedo good apart from the bezel which is quite rusty. Has been re-calibrated by the looks of it though. std Smiths fuel gauge - good nick, works fine. 3x oil pressure - 2 std smiths, one 300 degree sweep. 2 or 3 temp gauges - 1 in celcius, one in farenheit, and 1 just colours (I took one to bits for some reason, can't remember which one). Std Amp meter.
£25 plus shipping for the lot (obviously minus the tacho) Includes all mounting clamps and finger nuts.

I can get pics, but it'll be in a few days time.

Hi pantera,

Can you mail me please at michielkisjes@kpnplanet.nl and send me the prices for the wiring loom front to back and of the early type gearchange with support. I also would like to have a pic of this gearchange if that's possible.

Thanks and looking forward to hear from you.

Michiel.