 |
 |
 |
|
It is currently Thu Jun 18, 2026 7:15 am
|
View unanswered posts | View active topics
  |
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
MiniMike
Part built GTM
Joined: Wed Sep 28, 2011 4:13 am
Posts: 143
Location: Victoria BC Canada
GTM: Cox/Coupe
|
 Rear Wheel Cylinders Anyone know what size bore the rear wheel cylinders should be. I am replacing the old ones and they are stamped with LUCAS 1004, but can't find what size that is as that part number does not show up on any of the Mini parts sites. I have Mini 8.4 discs up front, and the modified for parking brake, drum setup in the rear. Thanks ..
_________________
MiniMike in Victoria
1989 GTM Coupe - SOLD
1989 Mini 30 VTEC powered
1966 Mini Van Honda ZC powered
|
| Mon Jul 09, 2012 12:46 am |
  |
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1769
Location: In the workshop
GTM: Cox/Coupe
|
Re: Rear Wheel Cylinders I would highly recomend MGBV8 slaves cylinders 22.2 mm from memory gives a good bias shift rearwards, otherwise you will be locking fronts all the time
Neil
_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
| Mon Jul 09, 2012 10:46 am |
|
|
|
Mr Mac
Ready for SVA
Joined: Thu Dec 24, 2009 9:31 pm
Posts: 274
Location: NW Leicestershire
GTM: Cox/Coupe
|
Re: Rear Wheel Cylinders I went back to Mini cylinders as the capacity of the master cylinder was insufficient and pedal travel was too great.
|
| Mon Jul 09, 2012 5:01 pm |
|
|
|
MiniMike
Part built GTM
Joined: Wed Sep 28, 2011 4:13 am
Posts: 143
Location: Victoria BC Canada
GTM: Cox/Coupe
|
Re: Rear Wheel Cylinders I pulled one out and measured and it's 19mm or 3/4 inch bore, so I'll stick with that for now as the brakes seems balanced with that size... was trying to order the bits before tearing it out.. but now at least I can get the right part.. thanks
_________________
MiniMike in Victoria
1989 GTM Coupe - SOLD
1989 Mini 30 VTEC powered
1966 Mini Van Honda ZC powered
|
| Mon Jul 09, 2012 5:12 pm |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
|
