I used ethanol, because we have it as a perfume base, and it does seem to work with quite a bit of rubbing with a soft rag we now have doors assembled and engine cover mesh grills fitted in the house and I refitted the front section back onto the chassis on Sunday afternoon, I was attempting to get the rear plexiglass window in but failed as soon as I got to the halfway into the seal rubber stage, when it popped out at the corner, I have long ago fitted screens, even in my old Cox after breaking one, but never one with such tight radius corners, advice is welcome if you have done it
John
I have jobs I could be doing but can't get materials due to lockdown and I cant get into my company workshop to get bits of machining or welding done, I ordered polyester resin to make screen side extensions to allow the Dino screen to be fitted, but the delivery driver arrived at our UK subsidiary the day after your lockdown and although a nearby alternative address was posted on the reception door my resin was returned to sender and no knowing if or when I will receive, next "wahala" I had fitted the old style B-L round front indicator and side lights but did not like the look of them, I think the 13' wheel coupes would normally be fitted with Metro lights? but have never seen a Metro here so cut myself a little cardboard template to the slight radius at the edge of the front section to check out the flasher side light units fitted to the Indian made tuktuks that fill up our roads, almost perfect fit, so bought a pair and made a little alli backing plate to cover up the slight difference in shape, now needed some epoxy resin to glue backing plate to light units, but due to our shutdown the shops are shut and unlike you no home deliveries here if ordered online, so here I am cooking, scratching my bum (I wash hands after scratching!) and anything else I can do to keep occupied.