Why ?
Later Coupe and Rossa system works well.
| Attachments: |
| Coupe gear change1.jpg [ 92.23 KiB | Viewed 2571 times ] |
| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Coupe cable gear change help http://www.gtmdrivers.com/forum/coupe-cable-gear-change-help-t4478.html |
Page 1 of 1 |
| Author: | grizzler73 [ Tue Apr 28, 2020 9:00 am ] |
| Post subject: | Coupe cable gear change help |
Hi Guys, I'm looking at building a cable gear change, like in a Elise, MGF etc for my Heerey GTM (A series rod box) anybody done this? Pics and info would be great! Thanks! Simon |
|
| Author: | rossabitz [ Tue Apr 28, 2020 11:41 am ] | ||
| Post subject: | Re: Coupe cable gear change help | ||
Why ? Later Coupe and Rossa system works well.
|
|||
| Author: | kano nordie [ Wed Apr 29, 2020 2:54 pm ] |
| Post subject: | Re: Coupe cable gear change help |
I have to agree with Alan, I would have bought from him if I had not modified a gearbox 20+ years ago to pass the selector shaft out through the front. john |
|
| Author: | grizzler73 [ Wed Apr 29, 2020 6:57 pm ] |
| Post subject: | Re: Coupe cable gear change help |
I forgot to mention it's for a competition car! I appreciate your points but I want to get the car as low as possible (I'm allowed to get down to 100mm) and I am concerned about kerbs on any excursions of track! Also any accuracy I can gain for a race situation is worth the effort I think. |
|
| Author: | kano nordie [ Thu Apr 30, 2020 1:50 pm ] | ||
| Post subject: | Re: Coupe cable gear change help | ||
Ian Gorrie's GTM was low (and quick) with the gear change underneath the box??
|
|||
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|