GTM Owners Club Forum
http://www.gtmdrivers.com/forum/

Cox gtm Clutch and Brake Master cylinders.
http://www.gtmdrivers.com/forum/cox-gtm-clutch-and-brake-master-cylinders-t4591.html		 Page 1 of 1
Author:  kenhind37 [ Sat Jan 09, 2021 2:05 pm ]
Post subject:  Cox gtm Clutch and Brake Master cylinders.
Hello All,

Just been informed by a GTM owner of a brake failure to his car caused by the bonnet rubbing on the top bend out of Master Cylinder on older type set up and caused him to loose brake fluid therefore his brakes, just checked ours and exactly the same when you look under you can see them hitting bonnet, ours is not on the road yet so we can modify, either re-plumb or realign the bonnet somehow, so please be aware all out there, KEN HIND.
Author:  Ken555 [ Sat Jan 09, 2021 5:35 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Image
Image

This was my solution, plenty of clearance now.
Author:  kano nordie [ Mon Jan 11, 2021 6:05 am ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
I also went the banjo route
Author:  kenhind37 [ Tue Jan 12, 2021 6:41 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Thank's for info, should have thought that one out, it,s obvious when your shown it, great pics, thanks again will get organised with that one, Cheers, KENHIND.
Author:  kenhind37 [ Wed Jan 13, 2021 6:11 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Thanks again for info, but I am having trouble sourcing the banjo fitting as shown, is there anyway you can give me the info so I could order, sorry to a pain, Cheers, KENHIND.
Author:  kenhind37 [ Wed Jan 13, 2021 6:15 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Hi again, I think I have just located one on the Charles Ware Morris Minor site, but would still appreciate answer to my previous post, Cheers, KENHIND.
Author:  Ken555 [ Wed Jan 13, 2021 9:06 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Rimmer Bros

1 7H7851 UNION BANJO
1 C5192A BOLT-BANJO
1 233220A COPPER WASHER
1 538532 COPPER WASHER 7/16
Author:  kano nordie [ Thu Jan 14, 2021 6:26 am ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Hi Ken (555)
Please can you show a picture of your bias bar setup, there is only a glimpse of it in your master cylinder picture. Only curiosity mine is already installed.
Thanks
John
Author:  Ken555 [ Thu Jan 14, 2021 9:59 am ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
I'll get some pics to upload.

But its one of these, https://kentautodevelopments.com/products/kad-adjustable-brake-bias-pedal-box
Author:  Ken555 [ Thu Jan 14, 2021 2:00 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Image
Image
Image
Image

Click for bigger pics
Author:  kano nordie [ Thu Jan 14, 2021 2:18 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Thanks ken looks neat, with a push rod of the original brake peddle up to the bias bar, easier to adjust than my home made adaption of the peddle box
john
Author:  Ken555 [ Thu Jan 14, 2021 3:25 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
yes, a rod down to the brake pedals.

Fitted the other way around from what it would be in a mini, the master cylinders would be out over the engine bay.
Author:  kenhind37 [ Fri Jan 15, 2021 1:29 pm ]
Post subject:  Re: Cox gtm Clutch and Brake Master cylinders.
Thanks for replies, great info KEN555 will get sorted soon, Cheers for help all :D
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/