GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Daz's GTM Rossa Project http://www.gtmdrivers.com/forum/daz-s-gtm-rossa-project-t1646.html |
Page 1 of 1 |
Author: | dazibee [ Mon Dec 06, 2010 5:31 pm ] |
Post subject: | Daz's GTM Rossa Project |
Hi all Daz here, recently caught the GTM bug. Here is my Rossa which I have just begun to rebuild: The electrics are a mess so i am rewiring it and sorting out the interior first of all: Plenty to keep me busy.... |
Author: | the other Tim [ Mon Dec 06, 2010 6:40 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Welcome to the nut house Your loom looks like it has the potential for much smoke |
Author: | Alex Gibson (AXLE) [ Mon Dec 06, 2010 7:07 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Welcome to the house of fun Daz Theres no turning back now!! When i first got the dash (plank of wood) out of my coupe all i could see was blue cables and scotch locks much as yours looks all red! Enjoy!!!! |
Author: | dazibee [ Mon Dec 06, 2010 7:50 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Ok so thats the wiring sorted except for around the engine where I can't get at yet. New fusebox and relays integrated into the original loom. All the surplus and dodgy wiring binned. |
Author: | RaymondH [ Mon Dec 06, 2010 9:06 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Good luck with the project! Wiring looks much better now Is that the module from CBS? Seeing that is making me think that it's time I got back to mine |
Author: | dazibee [ Mon Dec 06, 2010 9:14 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Yea from CBS. It made the job a lot easier. If I had stuck with that Metro PCB it would have been a nightmare. |
Author: | dazibee [ Mon Dec 06, 2010 10:05 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
The electrics all work now. Next up is that grotty dashboard. It reminds me of something you would find in a Vauxhall Shove-it. When I found out the only way to remove it was via the windscreen aperture its days were numbered. So...tried this instead: |
Author: | West [ Mon Dec 06, 2010 10:53 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
Welcome Neil |
Author: | CamelotR [ Tue Dec 07, 2010 8:51 am ] |
Post subject: | Re: Daz's GTM Rossa Project |
Very nice. Respect! |
Author: | gtmdriver [ Tue Dec 07, 2010 9:51 am ] |
Post subject: | Re: Daz's GTM Rossa Project |
CBS do a lid for that unit too now. |
Author: | dazibee [ Tue Dec 07, 2010 10:31 am ] |
Post subject: | Re: Daz's GTM Rossa Project |
gtmdriver wrote: CBS do a lid for that unit too now. Yes had one but sent it back. £20 quid for a cheap flimsy bit of plastic with no means to attach to the fuse box. Way overpriced imo. |
Author: | RaymondH [ Tue Dec 07, 2010 11:28 am ] |
Post subject: | Re: Daz's GTM Rossa Project |
Great to see another Rossa project and somebody else's approach to it but at the same time it depresses me You guys all seem to work so quickly whereas I've been at mine for well over 2 years now..... |
Author: | Malcolm_Ball [ Tue Dec 07, 2010 4:49 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
RaymondH wrote: Great to see another Rossa project and somebody else's approach to it but at the same time it depresses me You guys all seem to work so quickly whereas I've been at mine for well over 2 years now..... Is it like dieting ? Where if You do it fast - You do it again I admit I'm lazy both My GTMs were purchaed as runners (just) |
Author: | dazibee [ Tue Dec 07, 2010 6:36 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
RaymondH wrote: Great to see another Rossa project and somebody else's approach to it but at the same time it depresses me You guys all seem to work so quickly whereas I've been at mine for well over 2 years now..... No I work like a snail, I've just got a months worth of work to post up lol. |
Author: | RaymondH [ Tue Dec 07, 2010 9:30 pm ] |
Post subject: | Re: Daz's GTM Rossa Project |
You've given the game away now |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |