|
|
It is currently Thu Apr 18, 2024 11:54 am
|
View unanswered posts | View active topics
Author |
Message |
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
my gtm project(s)
Hi , i guess i need a project page here ! any ideas , hints or help welcome Ok my projects , (too many) red gtm coupe 1981 oct finished 1997, completed 33 miles now ! just getting ready for its second mot , hope to be driving it this week , does need painting but the chassis is very good , metro gta unleaded engine (standard) , home spun exhaust using carbon can (be nice to get a stainless setup?), fitting hi-lo's and 13" wheels , vented front brakes and super fins , hope to move the fuel tank to the front where it belongs . trying to add a pic now . second up 1982 kit, redgistered 1963, in bits been welded , not too bad some spaceframe and tops of sills where the body joins, replaced with bigger captive nuts, needs blasting and then rustproofing ( yes the rustproofing dilema, which one should i go for , and can i make my mind up while there is still some good metal left ?) was running a 1300gt engine, 11 stud , not sure what to put in although i have an avonbar 1380 sat on a jack knight straight cut box that was very quick in the last mini it was in , i have a metro turbo lump too, third there is the first gtm i bought which i bought as an ex racer , it had a turbo 11 stud engine not a metro though, it must of been very quick as rust had made it lightweight even then, i could not part with it so its sat there for many years with me not knowing what to do with it , that was until i decided it needed a home spun chassis and a hyabusa motor, my drawings for the chassis are completed but i suppose it will have to wait until the others are done first, i have a tig welder now though so am thinking aluminium chassis ......... sorry tried to put some photo's here but it could not upload attachment ?
|
Tue Jul 06, 2010 2:19 pm |
|
|
Pantera2075
On the Road
Joined: Fri Oct 12, 2007 9:38 am Posts: 740 Location: Stoke
|
Re: my gtm project(s)
Rustproofing - have you thought about having it galvanised?
And pics are a pain over 1meg and pretty much must be .jpg
Other than that, this is the easiest forum I know to post pics.
_________________ GTM Libra, GTM Coupe, Siva Moonbug, GMC Safari And DeTomaso Pantera.
|
Tue Jul 06, 2010 8:31 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
i have thought of galvanise , both electro and hot dip, por 15 and zinc rich paint , the chassis now needs either another blast or a dip , but its the pros and cons , for example hot dip will it warp the chassis , its such a minefield with so many different answers , i did read on this site an owner saying his had been done and he thought it was ok although he did say he felt it not a big issue as it was not the most accurate chassis any way, then i see on a landrover forum people advising against because of the twist problem and i thought that was a fairly heavy structure, i would like it to work and preserve my hard work for as long as possible. Have any owners any experience with galvanising a gtm and have they taken measurements first and checked after? if so where was it done ? also how much weight did it add ?
|
Tue Jul 06, 2010 8:58 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
also was womdering how to resize my photos ? from 12 mp to under 1 mp ?
|
Tue Jul 06, 2010 9:01 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
And has anyone any information on roof heights ? i have two with the later flat top infront of the front bulkhead , and one with a dip the same as dino's , this one has a lower roof height from the sill to the top of the door gap making the roof lower ?
|
Tue Jul 06, 2010 9:04 pm |
|
|
Pantera2075
On the Road
Joined: Fri Oct 12, 2007 9:38 am Posts: 740 Location: Stoke
|
Re: my gtm project(s)
realscamp wrote: also was womdering how to resize my photos ? from 12 mp to under 1 mp ? I use "Imageforge" - free download - it has a file open feature that lets you resize at the same time - then resave and hey presto. I talked to a galvaniser about hot dipping mine - he said that if the operator was worth his salt there shouldn't be a problem with warping. Either that or how about hot zinc spray?
_________________ GTM Libra, GTM Coupe, Siva Moonbug, GMC Safari And DeTomaso Pantera.
|
Tue Jul 06, 2010 9:45 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
Hi , yes i have considered it , a friend had some outside metal work sprayed at the time it was 8 years old he had meant to paint it but never got round to it , no rust present , my fear with this tho is the inner box section get no coverage although waxoyl may help here, nice to meet you here and thanks for taking the time to read/reply , more food for thought !
|
Tue Jul 06, 2010 10:19 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
|
Sat Jul 10, 2010 3:53 pm |
|
|
the other Tim
The Terrible Tims
Joined: Sat Sep 29, 2007 12:23 pm Posts: 487 Location: suffolk GTM: Cox/Coupe
|
Re: my gtm project(s)
Very nice, the red one could be quite a sleeper with the rat look and a decent power plant
_________________ I'm not a complete idiot, parts of me are missing!!!!!
|
Sat Jul 10, 2010 6:03 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
Hi Tim , lol not sure about that ! it is a rat now but has a few redeeming features (33 miles since completion in 1997)), the floor/chassis is completely solid with no rust and original (no welding), the body is in good condition as is the interior, just needs a good paint job as it was painted many years ago and then micro blistered, the engine is an unleaded metro gta 1275 with a low milage (was 998 when bought on 10" wheels, i changed it and made the exhaust), the back is now done with hi-lo's , super fins and 13" compomotives shod with yokahama 175/50/13's, the front is getting metro vented (as i have some already on mini hubs) and i have yet to put the steering rack where it should be (on the subframe) rather than the bulkhead to straighten the track arm, then when i have the mot it will see a decent paint job, im rushing a bit because i sold my usual hack and was intending to use this one ! mmmm The yellow one is a future resto, having completed the welding , just needs fettling and dip or sandblast then rebuild, i have all the bits. The green one which as yet i have to find picture ( its currently buried in a bramble bush , where it gets no complaints ) and will be dug out for my most exciting project , the hayabuse transplant ( looking for another gtm coupe to aid this) I have the engine and an lsd and some bits already sorted but i need some more ! The engine kind looks tough to fit and get a drive so i have some headscratching to do ( i have offered it up to the subframe ) i will keep pictures coming as things change , thanks for taking an interest, simon
|
Sat Jul 10, 2010 9:41 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
Hi, new update, looks like my yellow gtm is going to lose its a-series ......
|
Mon Jul 12, 2010 2:51 am |
|
|
dcrosby13
Part built GTM
Joined: Sat Jun 26, 2010 5:27 pm Posts: 140 Location: warrington
|
Re: my gtm project(s)
what size vtec is that ?
|
Mon Jul 12, 2010 2:38 pm |
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm Posts: 1762 Location: In the workshop GTM: Cox/Coupe
|
Re: my gtm project(s)
looks to me a B18C4, in other words a 1800.
Got the s9b gearbox?
Neil
_________________ IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
Mon Jul 12, 2010 2:57 pm |
|
|
realscamp
Part built GTM
Joined: Wed Jun 30, 2010 9:37 am Posts: 106 Location: somerset GTM: Cox/Coupe
|
Re: my gtm project(s)
Hi , yes its a B18C4 with the lsd , i think i had been reading to much about your honda engined cars lol i picked it up last night still in the donor, it was snicking into 4th from 3rd when pushed hard , although i think the clutch feels low (maybe fluid leak?) Have to say tho certainly revved nice .........
|
Mon Jul 12, 2010 3:16 pm |
|
|
dcrosby13
Part built GTM
Joined: Sat Jun 26, 2010 5:27 pm Posts: 140 Location: warrington
|
Re: my gtm project(s)
should be interesting once its fitted you going to rebuild/ fettle the engine first?
|
Mon Jul 12, 2010 5:37 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|