GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Paul's k3 http://www.gtmdrivers.com/forum/paul-s-k3-t2686-270.html |
Page 19 of 23 |
Author: | tonygerrard(1049) [ Tue Jan 01, 2019 6:13 pm ] |
Post subject: | Re: Paul's k3 |
Hey Catsam, You've recently removed a subframe from a K3, aside from pipes and wires, how long did it take? |
Author: | catsam [ Tue Jan 01, 2019 7:32 pm ] |
Post subject: | Re: Paul's k3 |
I can't really say how long it took me to remove the subframe as I did it in my spare time over about 2 weeks |
Author: | jaybee [ Tue Jan 01, 2019 8:26 pm ] |
Post subject: | Re: Paul's k3 |
tonygerrard(1049) wrote: Hey Catsam, You've recently removed a subframe from a K3, aside from pipes and wires, how long did it take? Tony When I did my K3, the removal of the Subframe on the front took about an hour once I had spent 2 days freeing off seized nuts & bolts, whilst the rear took me about 3 hours, again after freeing and cutting off even more seized fixings. I suppose times reflect the condition of the subframes and what you need to remove to make them light enough to manhandle J |
Author: | tonygerrard(1049) [ Tue Jan 01, 2019 10:23 pm ] |
Post subject: | Re: Paul's k3 |
Thank you Jaybee, I might have to do the necessary removal of the two subframes prior to shipment and storage. Cheers |
Author: | catsam [ Sat Feb 23, 2019 6:43 pm ] |
Post subject: | Re: Paul's k3 |
The black wheel arch has fallen off with help from me And now the blue one has fallen off too |
Author: | catsam [ Sat Feb 23, 2019 6:48 pm ] |
Post subject: | Re: Paul's k3 |
I have done it I cut the wheel arch off |
Author: | catsam [ Sat Feb 23, 2019 7:21 pm ] |
Post subject: | Re: Paul's k3 |
Author: | sanzomat [ Sat Feb 23, 2019 10:04 pm ] |
Post subject: | Re: Paul's k3 |
brave stuff! Looking forward to seeing it finished! |
Author: | tonygerrard(1049) [ Sun Feb 24, 2019 8:50 pm ] |
Post subject: | Re: Paul's k3 |
Catsam. Well done job! Are you going to top coat with gelcoat and cover the gelcoat with some flashtape so it gives a smooth finish. When it's gone off sand with 240 work down to 1500 then paint to match? |
Author: | catsam [ Thu Mar 07, 2019 1:52 pm ] |
Post subject: | Re: Paul's k3 |
I was not happy with the other side of the car so I cut a bit more out of the wheel arch |
Author: | catsam [ Fri Mar 08, 2019 10:24 pm ] |
Post subject: | Re: Paul's k3 |
It's starting to look like this might work |
Author: | jaybee [ Mon Mar 25, 2019 5:29 pm ] |
Post subject: | Re: Paul's k3 |
catsam wrote: You’re just showing off now J. |
Author: | catsam [ Tue Mar 26, 2019 5:46 pm ] |
Post subject: | Re: Paul's k3 |
I don't know what to do with it gloss paint or I could paint with textured paint or cover it with something I think might paint and if I don't like it I could cover with something and make I look good |
Page 19 of 23 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |