GTM Owners Club Forum
http://www.gtmdrivers.com/forum/

Paul's k3
http://www.gtmdrivers.com/forum/paul-s-k3-t2686-285.html
Page 20 of 20

Author:  WEST [ Tue Mar 26, 2019 10:29 pm ]
Post subject:  Re: Paul's k3

I vote for going straight to cover, but take your time doing it!

Neil

Author:  catsam [ Thu Mar 28, 2019 4:36 pm ]
Post subject:  Re: Paul's k3

I have gone for the covered look

Image

Author:  catsam [ Fri Apr 05, 2019 7:07 am ]
Post subject:  Re: Paul's k3

I'm waiting for some better whether so I can paint my wheel arches in time for the kitcar show at stoneleigh

Image Image

In the meantime I made a centre console

Image
Image Image


Image

And yes that is a mouse trap in my car

Author:  catsam [ Sat Apr 20, 2019 8:13 pm ]
Post subject:  Re: Paul's k3

I have got some paint on the car

Image Image

I would say it looks good but :oops:

Image

I don't think using a paint brush worked :? :roll:

Image Image

it allso shows how bad my paint has faded the top part of the wheelarch is a lot lighter my car needs a full respray

Author:  catsam [ Fri Jun 07, 2019 4:30 pm ]
Post subject:  Re: Paul's k3

I'm back looking at the spedo calibrator I have a spedo working on the bench so I can play with the input

Image Image Image

Author:  catsam [ Tue Jun 25, 2019 9:25 pm ]
Post subject:  Re: Paul's k3

Its been so wet this summer i have had time make my Speedo bored all I have to do is write the programme for it
One that works :o

Image

Author:  WEST [ Sun Jun 30, 2019 11:39 am ]
Post subject:  Re: Paul's k3

ooo a little Nano. :D

Its great what you can get these days, I have a mega that I have had a little play with for different little projects very basic but been very helpful.


Neil

Author:  catsam [ Mon Jul 01, 2019 4:33 pm ]
Post subject:  Re: Paul's k3

It is amazing what you can get I think I might have killed the nano so I got this oscilloscope kit to test the arduino

Image

Author:  catsam [ Sat Sep 07, 2019 5:07 pm ]
Post subject:  Re: Paul's k3

I have a new toy for the k3 um right how am I going to get this to fit. I think the new centre console might have to be changed :shock:
the spedo will have to wait

Image Image

I could move stero up but I have a big hole for the clock I don't know if it will fit inbetween the bottom of the dashboard and the clock or I could cut the bottom of the dashboard and fit top in the dashboard and the bottom it in to the new centre console and but i do not no if the dash is part of the k3,s strength

Author:  catsam [ Fri Sep 27, 2019 8:00 pm ]
Post subject:  Re: Paul's k3

I started to fit a car stereo but look what happened

Image

I thought I would sort out some wire's then end up fitting a DBO2 plug for the ecu

Image Image Image Image

Author:  WEST [ Sat Sep 28, 2019 9:17 am ]
Post subject:  Re: Paul's k3

Where did you get you little PCB made for the speedo calibrator?

Author:  catsam [ Sat Sep 28, 2019 8:55 pm ]
Post subject:  Re: Paul's k3

hi I used aisler https://aisler.net/ to make manufacture the pcb there are overs

i also used http://fritzing.org/home/ to design the bored then sent to aisler to manufacturer the pcb bord I used this as it worked well with arduino
you can use any
https://www.autodesk.co.uk/products/eagle/
http://www.kicad-pcb.org

it can be a bit of a pain to do

Author:  WEST [ Sun Sep 29, 2019 9:18 am ]
Post subject:  Re: Paul's k3

Awesome..

starting to gather parts for my arduino project at the mo a protoboard will suffice but maybe one day I will need my own little pcb

Neil

Author:  catsam [ Tue Oct 15, 2019 3:11 pm ]
Post subject:  Re: Paul's k3

I just mist a parcel :roll:

But when i whent to pick it up :?:
Look what it was
Image

Very nice
I no what i wont for Xmas (am i allowed to say it ) a set of Adjustable Coilovers

Image

Author:  catsam [ Tue Dec 03, 2019 2:24 pm ]
Post subject:  Re: Paul's k3

I was just going to fit a car stereo and I end up buying all this :?:

Image

Page 20 of 20 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/