GTM Owners Club Forum
http://www.gtmdrivers.com/forum/

K3 hydraulic clutch conversion information
http://www.gtmdrivers.com/forum/k3-hydraulic-clutch-conversion-information-t4715.html		 Page 1 of 1
Author:  Brymar [ Sat Mar 19, 2022 7:18 pm ]
Post subject:  K3 hydraulic clutch conversion information
Hello
Can anyone give me the details of the hydraulic clutch conversion for a K3 please, I did this some time ago on my last K3 but all of my documents collected over the years went with the car, the main info I need is the hole locations on the bulkhead panel and the mods I need to do to the clutch pedal, I can gather the relevant mfg parts once I get the info. There were some excellent write ups done in the gtmowners magazine back in the day, does anyone have details now.
Cheers
Author:  Howardy [ Fri Mar 25, 2022 7:00 pm ]
Post subject:  Re: K3 hydraulic clutch conversion information
Hello, I bought a kit from Dudley at Talon Sportscars. I will try and attach some pics. The gearbox I decided to paint white before I fitted it!!
On the paper template the mounting holes for the master cylinder are not in the wrong place. I would offer up the mater cylinder before drilling the mounting holes. The master cylinder on the top has to be aligned for good pipe routing.

Attachments:
PICT0127.JPG
PICT0127.JPG [ 241.02 KiB | Viewed 1368 times ]
PICT0123.JPG
PICT0123.JPG [ 189.25 KiB | Viewed 1368 times ]
K3 clutch 002.jpg
K3 clutch 002.jpg [ 274.84 KiB | Viewed 1368 times ]
DSCF0062 (2).JPG
DSCF0062 (2).JPG [ 358.76 KiB | Viewed 1368 times ]
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/