GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
VDO instruments http://www.gtmdrivers.com/forum/vdo-instruments-t3504.html |
Page 1 of 1 |
Author: | PhilBSpyder [ Thu Jun 09, 2016 7:59 am ] |
Post subject: | VDO instruments |
When GTM supplied the VDO instruments for the Spyder, was a clock supplied?, or does anybody know where I could get hold of one in the same design? |
Author: | kano nordie [ Thu Jun 09, 2016 10:40 am ] |
Post subject: | Re: VDO instruments |
Try Speedy Cables I think they sell VDO instruments |
Author: | sanzomat [ Thu Jun 09, 2016 12:44 pm ] |
Post subject: | Re: VDO instruments |
Not sure you'd get a perfect match. Also, if you wanted to put a clock in the main binnacle what would you take out? I wouldn't want to lose any of the current gauges. I'm going to add an oil temp gauge in an a pillar pod. I found one with a white background that looks fairly similar and being separate it doesn't matter its not identical. |
Author: | PhilBSpyder [ Thu Jun 09, 2016 1:48 pm ] |
Post subject: | Re: VDO instruments |
Not wanting to take anything out of the main binnacle. Currently have a push start/stop button on dashboard which is extra to key ignition start so as I don't use push button this will be removed leaving a hole/space |
Author: | roger [ Thu Jun 09, 2016 3:06 pm ] |
Post subject: | Re: VDO instruments |
http://www.ebay.co.uk/itm/MGF-TF-OIL-GA ... Sw1DtXH78Y MGF ones aren't a bad match if it's not positioned too close. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |