| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Rossa Multi-way Connectors http://www.gtmdrivers.com/forum/rossa-multi-way-connectors-t4714.html |
Page 1 of 1 |
| Author: | Gustywinds [ Tue Mar 15, 2022 11:38 pm ] |
| Post subject: | Rossa Multi-way Connectors |
Does anybody know the manufacturer or have a source for the multi-way connectors that are used to remove the front and rear body sections on the Rossa? I want to redo the from end wiring. I can buy a complete new loom but don’t really need it all. |
|
| Author: | sidewinder [ Wed Mar 16, 2022 3:48 pm ] |
| Post subject: | Re: Rossa Multi-way Connectors |
Pics? |
|
| Author: | sanzomat [ Wed Mar 16, 2022 4:03 pm ] |
| Post subject: | Re: Rossa Multi-way Connectors |
The ones used on my Spyder are fairly basic and not waterproof so any multi connector would be an improvement. I recently used econoseal on my Locost and found them easy as long as you have the right crimper and seem pretty good. They come in lots of different sizes but for example a 10 way: https://www.ebay.co.uk/itm/133662228426 A suitable crimper: https://www.ebay.co.uk/itm/304366707758 These crimpers have a two level stepped crimp jaw so the smaller bit crimps the wires and the larger step crimps the seal and insulation all in one squeeze. Much better than the type that you'd use on the insulated crimp terminals. |
|
| Author: | catsam [ Thu Mar 17, 2022 7:25 am ] |
| Post subject: | Re: Rossa Multi-way Connectors |
http://www.polevolt.co.uk/index.html http://3waycomponents.co.uk/?route=prod ... uct_id=876 https://www.autoelectricsupplies.co.uk/mobile/home |
|
| Author: | Gustywinds [ Thu Mar 17, 2022 7:15 pm ] | |||
| Post subject: | Re: Rossa Multi-way Connectors | |||
sidewinder wrote: Pics? This is the front one.The Male is a panelmount and fixedd to the removable section the femaleunplugs from it. I think its 10 way
|
||||
| Author: | Gustywinds [ Thu Mar 17, 2022 7:23 pm ] |
| Post subject: | Re: Rossa Multi-way Connectors |
Ha, Having just posted the pics which came up a lot bigger than I expected, I can see a manufacturer's name which I couldn't see with the naked eye They are by AMP from Tyco TE. Now I just need to work my way through their massive calalogue |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|