It is currently Fri Mar 29, 2024 2:56 pm




Post new topic Reply to topic  [ 9 posts ] 
Late Libra Door Hinge Adjustment 
Author Message
Looking like a GTM

Joined: Tue Mar 24, 2020 12:20 am
Posts: 159
Post Late Libra Door Hinge Adjustment
Does anyone know how the top hinge can be adjusted on the very late Libra revised door hinges that go right through the door?
It looks like there may be an eccentric bush in the door (could it be that easy?) but I'd like to check before I start turning anything.
Cheers.


Tue Sep 01, 2020 11:18 pm
Profile E-mail
Part built GTM

Joined: Sun Jan 19, 2020 8:46 am
Posts: 65
Post Re: Late Libra Door Hinge Adjustment
Not sure if this is late or early?


Attachments:
IMG_1621.JPG
IMG_1621.JPG [ 178.68 KiB | Viewed 1865 times ]
Wed Sep 02, 2020 10:00 am
Profile E-mail
Looking like a GTM

Joined: Tue Mar 24, 2020 12:20 am
Posts: 159
Post Re: Late Libra Door Hinge Adjustment
Thanks. That’s late, the one I have. The drawing makes the threaded nuts at the top and bottom look eccentric but I think I’m going to have to take it to bits to see.


Wed Sep 02, 2020 10:10 am
Profile E-mail
Part built GTM

Joined: Sun Jan 19, 2020 8:46 am
Posts: 65
Post Re: Late Libra Door Hinge Adjustment
Probably just artists license :)
Because the pins are relatively easy to move about l can't see them going to the trouble of eccentric bushes....
Keep us informed what you find :wink:


Wed Sep 02, 2020 11:19 am
Profile E-mail
On the Road

Joined: Wed Aug 11, 2010 9:27 am
Posts: 619
Location: Sheffield
GTM: Libra
Post Re: Late Libra Door Hinge Adjustment
If you do take it apart i'd like to see pics pics pics, i've never seen an upgrade kit for this.

_________________
2000 GTM Libra 1.8VVC 145BHP


Wed Sep 02, 2020 3:09 pm
Profile E-mail
Looking like a GTM

Joined: Wed Feb 09, 2011 1:12 am
Posts: 183
Location: Derbyshire
GTM: Libra
Post Re: Late Libra Door Hinge Adjustment
The bushes is made from 20mm hex bar with 16mm thread where is goes into the tube cannot remember what pitch but i have the tap at work because is i remade them in aluminium because the steel ones supplied were rather heavy the bush has a 10mm hole and is not eccentric i think you should be able to adjust where to bracket bolts to body if there is some clearance on holes i think the tube is used rather than nuts to keep the top and bottom parallel


Wed Sep 02, 2020 10:13 pm
Profile E-mail
Looking like a GTM

Joined: Tue Mar 24, 2020 12:20 am
Posts: 159
Post Re: Late Libra Door Hinge Adjustment
Thanks. I did think that eccentric bushes may be a bit sophisticated! When the rain stops I’ll try adjusting the hinge plate on the car.


Wed Sep 02, 2020 11:52 pm
Profile E-mail
On the Road

Joined: Wed Aug 11, 2010 9:27 am
Posts: 619
Location: Sheffield
GTM: Libra
Post Re: Late Libra Door Hinge Adjustment
Do the pegs of 4 & 5 fit direct into 2 & 3, metal to metal as it were?

_________________
2000 GTM Libra 1.8VVC 145BHP


Thu Sep 03, 2020 10:44 am
Profile E-mail
Looking like a GTM

Joined: Tue Mar 24, 2020 12:20 am
Posts: 159
Post Re: Late Libra Door Hinge Adjustment
sidewinder wrote:
Do the pegs of 4 & 5 fit direct into 2 & 3, metal to metal as it were?


Yes they do.


Thu Sep 03, 2020 11:10 am
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.

phpBB SEO