| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Spyder 1.8 k series exhaust manifold http://www.gtmdrivers.com/forum/spyder-1-8-k-series-exhaust-manifold-t3815.html |
Page 1 of 1 |
| Author: | NickP [ Wed Jun 21, 2017 8:09 pm ] |
| Post subject: | Spyder 1.8 k series exhaust manifold |
Hi does anyone know if you can remove the manifold without dropping the engine ? |
|
| Author: | Jaykart1227 [ Thu Jun 22, 2017 5:08 pm ] |
| Post subject: | Re: Spyder 1.8 k series exhaust manifold |
You can on a Libra without too much bother so I expect it's the same for the spyder. |
|
| Author: | sanzomat [ Thu Jun 22, 2017 8:16 pm ] |
| Post subject: | Re: Spyder 1.8 k series exhaust manifold |
I guess it should be possible but I can't confirm it. If you can it won't be as easy as a Libra 'cos the bulkhead curves back at the top quite a bit so it'll be tight getting to the upper studs - good luck! PS might be easier if you undo the steady bar and tilt the engine back with a jack? |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|