GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Front Ball Joints http://www.gtmdrivers.com/forum/fron-ball-joints-t3900.html |
Page 1 of 1 |
Author: | stewb [ Sun Oct 29, 2017 9:39 am ] |
Post subject: | Front Ball Joints |
Hi all, just looking for a bit of clarification as having searched I haven't found a definitive answer...not on the upper anyway. Front ball joints, I'm thinking : Upper is late Metro/R100? Lower is apparently Mk1 Golf Track rod ends Metro non GTI/A Correct or not? Cheers Stew. |
Author: | sanzomat [ Sun Oct 29, 2017 10:09 am ] |
Post subject: | Re: Front Ball Joints |
Can't comment on the ball joints but on the TRE's you are correct but beware that some sites list them as imperial thread and some as metric. I went metric and they fit fine. Also beware that the rack ends have extenders - when you take the old ones off makes sure you don't throw away the extenders! |
Author: | Jaykart1227 [ Sun Oct 29, 2017 10:30 am ] |
Post subject: | Re: Front Ball Joints |
Correct Stew, the upper ball joints are the standard Rover Metro / Rover 100 units. |
Author: | sidewinder [ Sun Oct 29, 2017 10:47 am ] |
Post subject: | Re: Front Ball Joints |
TREs are non GTi/a. Lower front: post20655.html Upper BJ are Rover Metro/100 front and rear. This might help with removal: hub-top-ball-joint-removal-t3018.html |
Author: | bob snooks (835) [ Sun Oct 29, 2017 11:16 am ] |
Post subject: | Re: Front Ball Joints |
Part no TC301 or FBJ5151 depending on your supplier for the upper ball joint on all 4 hubs. Bob. |
Author: | stewb [ Sun Oct 29, 2017 11:37 am ] |
Post subject: | Re: Front Ball Joints |
Brill, thanks all. I'll get busy filling my virtual basket! |
Author: | Elansprint [ Wed Nov 29, 2017 4:08 pm ] |
Post subject: | Re: Front Ball Joints |
The mk1 golf lower ball joints come in 15mm and 17mm pin does anyone know which one for the Libra Ian |
Author: | bob snooks (835) [ Thu Nov 30, 2017 1:02 pm ] |
Post subject: | Re: Front Ball Joints |
Hi Ian I haven't got one in stock to check pin sizes but I have always got the right one with these part numbers,TC207 or FBJ5056 (depending on your supplier). Bob. |
Author: | sanzomat [ Thu Nov 30, 2017 2:23 pm ] |
Post subject: | Re: Front Ball Joints |
Those part no's also fit Porsche 944. Can we claim our GTM's have Porsche suspension? |
Author: | Elansprint [ Thu Nov 30, 2017 5:14 pm ] |
Post subject: | Re: Front Ball Joints |
Thanks Bob |
Author: | Elansprint [ Sat Jan 13, 2018 5:02 pm ] |
Post subject: | Re: Front Ball Joints |
Anyone got any tips for removing the libra top ball joints I have a 46mm socket but the Rachet/bar will not engage hardly as socket is not deep enough Ian |
Author: | sidewinder [ Sat Jan 13, 2018 8:04 pm ] |
Post subject: | Re: Front Ball Joints |
It just so happens: hub-top-ball-joint-removal-t3018.html |
Author: | Elansprint [ Sun Jan 14, 2018 10:49 am ] |
Post subject: | Re: Front Ball Joints |
Many thanks great idea Ian |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |