Author |
Message |
madmazturbo
Ready for SVA
Joined: Sun Apr 04, 2010 10:11 pm Posts: 286 Location: Cwmbran, South Wales GTM: Libra
|
GTM Libra Fasteners
Does anyone know where i can get the existing allan key panel fasteners from for the rear clam shell as i am missing one + the washers to go with it. I did a search to contact manufacturer of the gtm libra but i can't seem to find them on the internet now.
Cheers Colin
_________________ Colin
Spin up the Rotrex
GTM Libra Honda 2.0l rotrex type r BMW 440d M Sport x drive BMW 320d M Sport
|
Mon Apr 12, 2010 3:21 pm |
|
|
roger
Ready for SVA
Joined: Sat Feb 14, 2009 6:06 pm Posts: 389
|
Re: GTM Libra Fasteners
STAINLESS COUNTERSUNK ALLEN BOLTS M6 X 16 http://cgi.ebay.co.uk/Pro-Bolt-alloy-M6 ... 3a50e32e89Can't remember if they are 19mm or 22 but this guy does both. They are alloy not stainless but are available in colours
|
Tue Apr 13, 2010 7:42 pm |
|
|
Matty H
Ready for SVA
Joined: Mon Feb 09, 2009 12:11 pm Posts: 317 GTM: Libra
|
Re: GTM Libra Fasteners
|
Tue Apr 13, 2010 9:31 pm |
|
|
roger
Ready for SVA
Joined: Sat Feb 14, 2009 6:06 pm Posts: 389
|
Re: GTM Libra Fasteners
I used theose for a couple of years but got fed up with replacing them as the bolt pulls through the plastic.
|
Wed Apr 14, 2010 4:27 pm |
|
|
Malcolm_Ball
On the Road
Joined: Sun Sep 30, 2007 4:37 pm Posts: 614 Location: RM13 ish
|
Re: GTM Libra Fasteners
Bump Someone asked about these at Detling - knew I'd find it sooner or later.
_________________ Malcolm GTM O/C Member 754.
|
Sat May 28, 2011 1:47 pm |
|
|
alanj9
GTM delivered
Joined: Mon Dec 13, 2010 1:13 pm Posts: 16
|
Re: GTM Libra Fasteners
Westfield (GTM) did have both the screw and the washers in stock.
Alan
|
Sat May 28, 2011 8:38 pm |
|
|
Steve Shield
Ready for SVA
Joined: Tue Sep 09, 2008 4:46 pm Posts: 302
|
Re: GTM Libra Fasteners
Try your local motor bike emporium -- they're fairing fasteners -- best to take an example as there are a couple of sizes to choose from.
|
Mon May 30, 2011 5:42 pm |
|
|
sidewinder
On the Road
Joined: Wed Aug 11, 2010 9:27 am Posts: 621 Location: Sheffield GTM: Libra
|
Re: GTM Libra Fasteners
I could whip you up an ally washer on my lathe, same as originals - also have spare SS bolts too.
SAS
_________________ 2000 GTM Libra 1.8VVC 145BHP
|
Mon May 30, 2011 6:20 pm |
|
|
bob snooks (835)
On the Road
Joined: Sat Sep 29, 2007 3:45 pm Posts: 998 Location: SL2 4JW GTM: Libra
|
Re: GTM Libra Fasteners
A member has found a new supplier as the link in the post above does not seem to be working. Try this link https://www.ebay.co.uk/itm/273385586299
_________________ Bob S. GTMOC Secretary
|
Fri Aug 06, 2021 11:06 am |
|
|