GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Wipers http://www.gtmdrivers.com/forum/wipers-t4196.html |
Page 1 of 1 |
Author: | Elansprint [ Tue Apr 30, 2019 6:46 pm ] |
Post subject: | Wipers |
Are the Libra wiper just metro items ? TIA Ian |
Author: | sidewinder [ Tue Apr 30, 2019 10:01 pm ] |
Post subject: | Re: Wipers |
No - well the mechanism and arms are Rover Metro/100; but my wiper blades are both 17.5" ones with spoilers, I think they are Bosch. |
Author: | Elansprint [ Wed May 01, 2019 7:13 am ] |
Post subject: | Re: Wipers |
Thanks for the reply thought that may be the case due to different size windscreen Ian |
Author: | sidewinder [ Wed May 01, 2019 10:01 am ] |
Post subject: | Re: Wipers |
Having said that, Rover Metro blades are 16"/400mm so they would fit though give a slightly smaller swept area. I think I went a size up or two - so maybe classed as 18" ones - but going too much longer causes them to clash IIRC. |
Author: | Juls [ Wed May 01, 2019 1:20 pm ] |
Post subject: | Re: Wipers |
Hi, From the manual - "Standard Rover Metro K Series wiper arms are used with the larger blades T0685 provided within the kit. It is possible to bend the standard Rover Metro arms at their ends nearest the fitment to the wiper blade to obtain a better sweep of the screen." From memory I didn't bend the arms, I just used a smaller blade.# Juls |
Author: | Elansprint [ Wed May 01, 2019 2:56 pm ] |
Post subject: | Re: Wipers |
Got a pair of replacements the originals were 19 inch (480mm) thanks for the advice Ian |
Author: | sidewinder [ Wed May 01, 2019 4:08 pm ] |
Post subject: | Re: Wipers |
19" are what the Cinquecento uses (which is what the Libra windscreen is). Did you go for traditional type or 'flat' blades? |
Author: | Elansprint [ Wed May 01, 2019 6:05 pm ] |
Post subject: | Re: Wipers |
Went for traditional type have MOT tomorrow only found peeling blade last night Ian |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |