GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Roof http://www.gtmdrivers.com/forum/roof-t4436.html |
Page 1 of 1 |
Author: | petesilcock [ Mon Jan 06, 2020 1:51 pm ] |
Post subject: | Roof |
1st try to upload pics See if these work |
Author: | petesilcock [ Mon Jan 06, 2020 1:55 pm ] |
Post subject: | Re: Roof |
Roof for English sunny day Seals not yet complete Pete |
Author: | Elansprint [ Mon Jan 06, 2020 6:56 pm ] |
Post subject: | Re: Roof |
Pete that's a nice neat job did you mould it yourself Ian |
Author: | petesilcock [ Mon Jan 06, 2020 8:32 pm ] |
Post subject: | Re: Roof |
Used the original roof to make a mould |
Author: | Spider [ Tue Jan 07, 2020 2:24 am ] |
Post subject: | Re: Roof |
Did anyone ever do a hardtop for the Spyder? |
Author: | Juls [ Tue Jan 07, 2020 4:41 pm ] |
Post subject: | Re: Roof |
Spider wrote: Did anyone ever do a hardtop for the Spyder? I know RDM started to develop one, they had full sized plug very near completion. Not sure what happened to it, if it ever made it to Westfield? Juls |
Author: | Jaykart1227 [ Fri Jan 10, 2020 10:03 pm ] |
Post subject: | Re: Roof |
That looks brilliant Peter! Like how you've done your windscreen as well. |
Author: | petesilcock [ Tue Jan 14, 2020 3:39 pm ] |
Post subject: | Re: Roof |
Windscreen has no edge seal at present. After the car is sprayed this can be filled with polyurethane or left open. No wind noise so option Pete |
Author: | Spider [ Thu Jan 16, 2020 4:33 am ] |
Post subject: | Re: Roof |
Can the join between the two halves slide? I am thinking about torsional rigidity of the car and whether the roof can make it stiffer. The four corner fixtures would need to be solid. Would be interesting to jack up one corner of the car and look for movement. |
Author: | petesilcock [ Mon Jan 20, 2020 7:34 pm ] |
Post subject: | Re: Roof |
I would be extremely worried if the original roof was part of the stiffness. Try it - easy to bend a thin piece of GRP with no core |
Author: | Spider [ Tue Jan 21, 2020 6:10 am ] |
Post subject: | Re: Roof |
Sure. I was just musing as to whether the roof insert could be (re)designed to usefully increase the stiffness. Probably moot since the Libra and Spyder have excellent torsional stiffness in the first place. |
Author: | petesilcock [ Tue Jan 21, 2020 9:03 am ] |
Post subject: | Re: Roof |
A bonded in panel with thick foam core would do that. Big boxes around the opening however are very stiff Only for Racing? For me wind in hair is more important Pete |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |