Author |
Message |
nikvanorton
Looking like a GTM
Joined: Tue Mar 24, 2020 12:20 am Posts: 159
|
Protech Springs
I'm thinking of getting a set of Protechs for my V6 Libra. Any idea of recommended spring rates? It's a road car and not going to be used on the track so I'd like a bit of comfort as well as handling. My car has anti roll bars front and rear and is running on 17 wheels. Thanks.
|
Mon Jan 18, 2021 10:41 am |
|
|
sidewinder
On the Road
Joined: Wed Aug 11, 2010 9:27 am Posts: 621 Location: Sheffield GTM: Libra
|
Re: Protech Springs
The protechs come with springs with a reasonable roadworthy spring rate.
_________________ 2000 GTM Libra 1.8VVC 145BHP
|
Mon Jan 18, 2021 12:48 pm |
|
|
nikvanorton
Looking like a GTM
Joined: Tue Mar 24, 2020 12:20 am Posts: 159
|
Re: Protech Springs
Do you know what they are, I just spoke to Protech and they didn’t seem sure.
|
Mon Jan 18, 2021 1:11 pm |
|
|
sidewinder
On the Road
Joined: Wed Aug 11, 2010 9:27 am Posts: 621 Location: Sheffield GTM: Libra
|
Re: Protech Springs
250lb front, 300 lb rear sez on their website.
I have protech fronts with 250 (no ARB) and am happy on the road.
I have AVO with 300 springs on rear now, I will buy a set of protech rear eventually, when i can afford to.
_________________ 2000 GTM Libra 1.8VVC 145BHP
|
Mon Jan 18, 2021 2:09 pm |
|
|
nikvanorton
Looking like a GTM
Joined: Tue Mar 24, 2020 12:20 am Posts: 159
|
Re: Protech Springs
Brilliant, thanks.
|
Mon Jan 18, 2021 2:17 pm |
|
|
sanzomat
GTM Nirvana
Joined: Sun Oct 19, 2014 10:10 pm Posts: 1138 Location: Bristol GTM: Spyder
|
Re: Protech Springs
300 rear seems a bit soft to me. Mine are 425 and aren't overly stiff, I'd say about right.
|
Mon Jan 18, 2021 4:09 pm |
|
|
nikvanorton
Looking like a GTM
Joined: Tue Mar 24, 2020 12:20 am Posts: 159
|
Re: Protech Springs
That sounds about right, the current GAZ springs are 9” 450lb.
|
Mon Jan 18, 2021 11:47 pm |
|
|
sidewinder
On the Road
Joined: Wed Aug 11, 2010 9:27 am Posts: 621 Location: Sheffield GTM: Libra
|
Re: Protech Springs
I just checked, i def have 10in FL x 1.9in ID x 300lbs/in rate on my rear Avos. Never really found em to be too soft I don't think..
_________________ 2000 GTM Libra 1.8VVC 145BHP
|
Tue Jan 19, 2021 12:31 pm |
|
|
Spider
Looking like a GTM
Joined: Sat Oct 22, 2016 12:41 am Posts: 154 Location: Brisbane Australia GTM: Spyder
|
Re: Protech Springs
|
Wed Jan 20, 2021 10:46 pm |
|
|
roger
Ready for SVA
Joined: Sat Feb 14, 2009 6:06 pm Posts: 389
|
Re: Protech Springs
Back in the day front were 250 rear 450
Later when RDM were making them the spring rates dropped quite a bit.
Some years ago Bob Snooks I think along with another member did all the sums to work out wheel frequency etc and came up with some answers. There is a topic on it somehwere.
I tried the lower rates and found the ride very compliant but too much roll and too soft for me.
I tried lots of different combinations and ended up back with 250 450. I also had anti roll bars.
|
Fri Jan 22, 2021 4:45 pm |
|
|