Need track rod ends for rear upper arms
| Author |
Message |
|
WEBER45
GTM delivered
Joined: Thu May 15, 2008 7:54 pm
Posts: 12
|
 Need track rod ends for rear upper arms What car are they from? i need 4 of the same.
|
| Sun Feb 14, 2010 4:38 pm |
  |
 |
|
Allen7
Looking like a GTM
Joined: Thu Nov 29, 2007 11:07 pm
Posts: 161
|
Re: Need track rod ends for rear upper arms Do you mean the rearmost locking arms (lock off the steering IYSWIM).
If so, can't remember thefitment but you'll need two right hand thread and two left hand thread.
Allen
|
| Sun Feb 14, 2010 10:37 pm |
|
|
|
WEBER45
GTM delivered
Joined: Thu May 15, 2008 7:54 pm
Posts: 12
|
Re: Need track rod ends for rear upper arms yes thats the ones track rod ends from cambridge oxford a60 i think but want to be sure before buying them
|
| Sun Feb 14, 2010 10:57 pm |
|
|
|
gtmdriver
On the Road
Joined: Tue Oct 30, 2007 8:44 am
Posts: 632
Location: Chester le Street
|
Re: Need track rod ends for rear upper arms Alan at Rossabitz will know.
_________________
GRP rules!
|
| Mon Feb 15, 2010 9:02 am |
|
|
|
advantage998
Part built GTM
Joined: Mon Mar 30, 2009 8:43 am
Posts: 84
GTM: K3
|
Re: Need track rod ends for rear upper arms I think Alan will be pretty much the only person with the austin cambridge joints, as he gets them specially made. I tried and couldn't find them anywhere other than him. The outer joints are just standard mini.
|
| Mon Feb 15, 2010 10:28 am |
|
|
|
rossabitz
Looking like a GTM
Joined: Wed Oct 10, 2007 7:18 pm
Posts: 157
Location: HUNTINGDON,CAMBS
|
Re: Need track rod ends for rear upper arms Hi
Yup I've got loads in stock.
Give me a ring.
Alan
_________________
Alan Britton
HUNTINGDON
CAMBS
PE26 2SY
rossabitz@btconnect.com
|
| Tue Feb 16, 2010 12:22 am |
|
|
|
ibrooks
Looking like a GTM
Joined: Mon Feb 04, 2008 5:41 pm
Posts: 210
Location: Darwen, Lancashire
|
Re: Need track rod ends for rear upper arms The outer one is from a Mini. The inner one though is the LEFT HAND one from an Austin Axx (lots of different ones A30, A40 etc.). They have a steering rod that does the same sort of job on the Austin so a pair for one of them has one with a right hand thread and one with a left hand thread. I could only source one when i needed a pair so converted the inner end to spherical joints.
Iain
|
| Fri Feb 19, 2010 8:57 pm |
|
|
