GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Rossa 2 rebuild - Modified rear subframe http://www.gtmdrivers.com/forum/rossa-2-rebuild-modified-rear-subframe-t3282.html |
Page 1 of 1 |
Author: | Jaykart1227 [ Sat Nov 14, 2015 12:58 pm ] | |||
Post subject: | Rossa 2 rebuild - Modified rear subframe | |||
Hi all, Thought I'd share a few pictures of my ongoing Rossa 2 rebuild - these show the modified rear subframe test fitted to the tub before painting. I'm planning to use a BMW K100 head a series engine and it makes for a tight fit against the rear bulkhead. As a consequence I've decided to remove the subframe front member and fabricate a removable section to allow easier access to the rear bulkhead area from underneath. This uses a piece of 30mm box section located with 4 bolts to captive nuts welded to the subframe. I've drilled a few lightening holes as well as this section adds a bit of weight. Just got to prep and paint the frame and bulkhead before rebuilding the rear suspension - then on to the front!! Should get it done before the end of the decade
|
Author: | West [ Sat Nov 14, 2015 2:27 pm ] |
Post subject: | Re: Rossa 2 rebuild - Modified rear subframe |
ooo K head this could be interesting Neil |
Author: | Jaykart1227 [ Sat Nov 14, 2015 4:15 pm ] | |||
Post subject: | Re: Rossa 2 rebuild - Modified rear subframe | |||
A mock up to wet the appetite.......
|
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |