GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Engine Steady Bar http://www.gtmdrivers.com/forum/engine-steady-bar-t4522-15.html |
Page 2 of 2 |
Author: | PhilBSpyder [ Tue Jul 28, 2020 2:50 pm ] | ||
Post subject: | Re: Engine Steady Bar | ||
Engine steady fitted. As always a little fiddly at the start to remove the old steady bar. New one fitted a dream. Just ordered some more rubber hose as age has caught up with the hose fitted at the moment This is just before the final tighten up Cheers to Alan... Rossabitz
|
Author: | Phaeton [ Tue Jul 28, 2020 3:21 pm ] |
Post subject: | Re: Engine Steady Bar |
That looks a hell of a lot better than it's predecessor |
Author: | sanzomat [ Tue Jul 28, 2020 4:40 pm ] |
Post subject: | Re: Engine Steady Bar |
Very neat. I'm assuming there is some clearance between the body and the washer at the body mount end as it looks close in the photo but hard to tell at that angle. If it were to touch you might get some vibes transmitted through. |
Author: | Phaeton [ Tue Jul 28, 2020 6:15 pm ] |
Post subject: | Re: Engine Steady Bar |
sanzomat wrote: If it were to touch you might get some vibes transmitted through. It's an A Series, that's classed as character |
Author: | PhilBSpyder [ Tue Jul 28, 2020 7:15 pm ] |
Post subject: | Re: Engine Steady Bar |
Aye there is space so the rattles and vibrations will have to come from somewhere else |
Author: | karsten [ Wed Oct 14, 2020 6:51 pm ] |
Post subject: | Re: Engine Steady Bar |
I got the part from Alan too. I've been driving it since August 2019. Unfortunately, I have to say that the housing comes loose very often and the seal breaks very often. Sorry for my English .. |
Page 2 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |