GTM Owners Club Forum
http://www.gtmdrivers.com/forum/

electric vacuum pump for brake servo
http://www.gtmdrivers.com/forum/remote-vacuum-pump-for-brake-servo-t4021.html
Page 1 of 1

Author:  scottey_b [ Sun Apr 22, 2018 10:00 pm ]
Post subject:  electric vacuum pump for brake servo

Has anyone fitted a remote vacuum pump to their libra? I wish to run individual throttle bodies on my car but do not want to retain the vacuum pipe running from the back of the car to the brake servo at the front. Retaining this this pipe would mean that I would have to have the new throttle bodies tapped and threaded. I think that the remote servo would be a simpler set up as I will be getting an auto electrician to look at the car anyway and the new parts wont need to be machined.
While fitting this pump I will also service the brakes with new disks and pads. If I am still not happy with the feel of this set up I will then uprate the callipers further. Has anyone done this or had experience with this set up? I would be interested to hear peoples opinions on if this is the best way to proceed.

thanks for any help/opinions

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/