Wondered if anyone had the x,y,z coordinates of the rear suspension pick ups on a Libra. I have a 'fancy' dynamic suspension analysis software that I am wanting to do an investigation on.
I am happy to share the results, if someone can supply me with the data.

- Can provide roll center location (vertical and horizontal) for different ride hts and roll angles, alone or combined.
- Anti squat/ dive for same range for each wheel.
- Camber angles for all ride heights and roll angles.
- Bumpsteer " "
- Force based roll centers " "
and more, much more

The program I have is called Wingeo3 and was designed by Wm. C. Mitchell who was involved with racing for 40 years - you can check him out on the net if you like.
if anyone is interested, please message me back.

It's unlikely anyone will have that info except the person who designed the suspension (Bryn for Mk1, RDM (think it was some bods at Rover) for Mk2 and Z-cars for theirs). If local to Leicester you're welcome to measure mine (Mk2) as the engine's out and the rear clam is off.