GTM Owners Club Forum
http://www.gtmdrivers.com/forum/

Cox GTM door windows
http://www.gtmdrivers.com/forum/cox-gtm-door-windows-t3946.html
Page 1 of 1

Author:  brafferton [ Sun Jan 14, 2018 7:09 pm ]
Post subject:  Cox GTM door windows

Just made a set of GTM polycarbonate windows for a Mr Jones, Gwynedd.
If anyone else would like a set they are £60 a car set. Comply to MSA rules.
If your interested call Stuart on 0113 2509852.
Hope I am not breaking any rules with this post.
Stuart

Author:  WEST [ Sun Jan 14, 2018 7:31 pm ]
Post subject:  Re: Cox GTM door windows

I will allow it :D

did you get any pictures?

Neil

Author:  brafferton [ Sun Jan 14, 2018 8:21 pm ]
Post subject:  Re: Cox GTM door windows

Sorry no pictures. They look just like a set of standard windows.
This is the first set we have made in 20+ years.
These are 4mm thick polycarbonate to MSA spec. Are the originals glass?
Stuart

Author:  Ken555 [ Mon Jan 15, 2018 10:07 am ]
Post subject:  Re: Cox GTM door windows

Are you Race Plastics ?
Original the coupe had polycarb (might be perspex) but swapped to glass later in the coupe lifetime.

Are these one piece windows or where they the sliding type similar to the early mini ?

I have just finished a template for a one piece windows with 210mm square sliders, Image
so might drop you an email for a price.

Author:  kano nordie [ Tue Jan 16, 2018 2:26 pm ]
Post subject:  Re: Cox GTM door windows

Hi Ken
I cut one piece polycarb windows and then cut a circular hole to accept the Car builder Catalogue round vents
John

Author:  Ken555 [ Tue Jan 16, 2018 2:54 pm ]
Post subject:  Re: Cox GTM door windows

The "Helicopter vents" as we call them.

I did wonder about a couple of the smaller ones on the back screen as hot air exits.

Image

Author:  kano nordie [ Tue Jan 16, 2018 3:09 pm ]
Post subject:  Re: Cox GTM door windows

That's the ones, I did not think I needed to open windows here, when it's 45c in the shade its not worth opening a window :lol: now in our cold season its enough to switch off the a/c
John

Author:  Ken555 [ Tue Jan 16, 2018 7:55 pm ]
Post subject:  Re: Cox GTM door windows

They would make trips to McDonalds tricky.

Author:  kano nordie [ Wed Jan 17, 2018 6:06 am ]
Post subject:  Re: Cox GTM door windows

we don't have any drive through takeaways here so not a problem, but would have thought a GTM too low down to be served without getting out out the car anyway :lol:
John

Author:  WEST [ Wed Jan 17, 2018 7:46 pm ]
Post subject:  Re: Cox GTM door windows

You open the door and shout, 'down here'

Neil

Author:  kano nordie [ Thu Jan 18, 2018 6:13 am ]
Post subject:  Re: Cox GTM door windows

I remember having to get out to pay the toll booth on the Severn Bridge, the same problem with the Caterham I had as well :lol:
John

Author:  brafferton [ Thu Jan 18, 2018 7:22 pm ]
Post subject:  Re: Cox GTM door windows

Ken555 wrote:
Are you Race Plastics ?
Original the coupe had polycarb (might be perspex) but swapped to glass later in the coupe lifetime.

Are these one piece windows or where they the sliding type similar to the early mini ?

I have just finished a template for a one piece windows with 210mm square sliders, Image
so might drop you an email for a price.

Give me a call on 0113 2509852.
Stuart

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/