Martyn's chassis.
Attachment:
Chassis.jpg [ 229.25 KiB | Viewed 3197 times ]
It looks to be a 80 chassis i.e 13 inch wheel.
Neil
| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Chassis/floorpan http://www.gtmdrivers.com/forum/chassis-floorpan-t4458.html |
Page 1 of 1 |
| Author: | Martyn [ Mon Apr 06, 2020 11:27 am ] |
| Post subject: | Chassis/floorpan |
Hi. I'm new to the foram and would first like to say hello and hope everyone is keeping safe in these strange times While I have all this free time I've been tidying my workshops and came across this. I believe it's a Cox GTM floor pan, I've placed it on here to see if it's of use to anyone before I scrap it Thanks and keep safe |
|
| Author: | kano nordie [ Tue Apr 07, 2020 7:01 am ] |
| Post subject: | Re: Chassis/floorpan |
Hi Martyn, I'm sure your chassis will be of interest, but 1st off you need to identify, early Cox GTM's had the rear chassis legs made from welded up sheet steel, later GTM's had a square tube fabricated frame to fit the "front" subframe. Regards John |
|
| Author: | West [ Tue Apr 07, 2020 11:01 am ] |
| Post subject: | Re: Chassis/floorpan |
HI Martyn and welcome, If you can post a picture we can help identify it, also where about are you? Neil |
|
| Author: | Martyn [ Wed Apr 08, 2020 11:06 pm ] |
| Post subject: | Re: Chassis/floorpan |
Hi all The tub l have is the one square tube front frame, I've taken a photo but not shure how to upload it , but I could send it by email or WhatsApp, my location is Crofton which is about 5 miles from M1 junction 39 or 41 Martyn |
|
| Author: | Phaeton [ Thu Apr 09, 2020 6:27 pm ] |
| Post subject: | Re: Chassis/floorpan |
Easiest way I find is to upload to https://imgbb.com/ then copy/paste the link, just make sure you make your image Public |
|
| Author: | West [ Fri Apr 10, 2020 9:28 am ] |
| Post subject: | Re: Chassis/floorpan |
Martyn's chassis. Attachment: Chassis.jpg [ 229.25 KiB | Viewed 3197 times ] It looks to be a 80 chassis i.e 13 inch wheel. Neil |
|
| Author: | derek hambly [ Fri Apr 10, 2020 2:17 pm ] |
| Post subject: | Re: Chassis/floorpan |
Hi Martyn, I am interested in the floorpan. I have sent you an e'mail. regards Derek Hambly |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|