| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Interior ideas http://www.gtmdrivers.com/forum/interior-ideas-t2511.html |
Page 1 of 1 |
| Author: | bencrock1 [ Mon Jan 14, 2013 11:08 pm ] |
| Post subject: | Interior ideas |
Hi everyone, I've recently purchased a gtm rossa and the interior needs a bit of TLC. I'm thinking of changing the dash, but not having seen many of them I don't really know what would look good in it. So without rambling too much does anyone have any pics of their cars interiors so i can get an idea of what I could do? Thanks for any responses 
|
|
| Author: | littlearmy1987 [ Tue Jan 15, 2013 12:23 pm ] |
| Post subject: | Re: Interior ideas |
Have a look at the bmw z1andz3 they look ace and they can be picked up cheap on ebay |
|
| Author: | bencrock1 [ Tue Jan 22, 2013 4:57 pm ] |
| Post subject: | Re: Interior ideas |
Hi, firstly thanks for the reply. When you talk about the bmw are you talking about using the whole interior including the dash? I was thinking of making the dash myself as production ones tend to be quite hard to work with what with them generally being in one piece (like the metro one it has now) |
|
| Author: | Steve Shield [ Tue Jan 22, 2013 8:12 pm ] |
| Post subject: | Re: Interior ideas |
I think that the Libra design is pretty smart -- very simple, all dials in front of the driver, even a glove box/cubby hole -- the only downsides for me are that the heater controls are not integrated and there's no space for a head unit. I'd probably re-design with the air vents outboard in the top panel and use the centre section for heater/ICE. Plenty of pics throughout the site. Steve |
|
| Author: | bencrock1 [ Thu Feb 07, 2013 5:41 pm ] |
| Post subject: | Re: Interior ideas |
Hi, Thanks for the comments steve. I'll have to have a look at their interiors, its a long way away but no harm in getting started early 
|
|
| Author: | baxter [ Thu Feb 07, 2013 8:00 pm ] |
| Post subject: | Re: Interior ideas |
hi, i am at the same stage myself and have spent all week looking on ebay and going round scrap yards. what i have decided to try is to use the gtm dash that came with the car and get various cheap/free dashboards and dash parts, cut buts out and try the shapes, holes pockets, pods ect on it and when happy i will bond them in place and mould it all together then smooth it and either airbrush it or have it covered. would be a total one off and would be a perfect fit without all the weight of most modern dashboards. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|