k3 front subframe to central tub
hi
on my k3 the front wheels stick out more on one side
in the photos you can see about 60mm on one side and 40mm its not all that precise. but you can see it looks out by about 20mm
in the workshop manual it states
when fitting the front subframe prior to assembling the front subframe into the tub it is necessary to drill the mounting holes in the glass fibre all these holes are clearly shown on the tub with indentations it sound like it would be hard to drill them 20mm to one side or have i got this wrong.
is there is lots of adjustment to get subframe in the centre of the tub
paul