It is currently Fri Feb 26, 2021 2:45 am




Post new topic Reply to topic  [ 4 posts ] 
Anti roll bars measurements 
Author Message
Admin, and Coupe Nutter
User avatar

Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1738
Location: In the workshop
GTM: Cox/Coupe
Post Anti roll bars measurements
Right K3'ers I have a question for you.

I am ideally looking for some dimensions of a MGF or TF front and rear anti roll bar and as some of you use MGF bits I was hoping I could get some measurements.

so any one able to help?


Neil

_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod


Sat Sep 16, 2017 4:51 pm
Profile
Part built GTM

Joined: Mon May 03, 2010 10:56 pm
Posts: 145
GTM: K3
Post Re: Anti roll bars measurements
I was just about to go to bed but you made me go in the garage with a tape measure!!
MGF front roll bar is 19mm diameter,880mm centre width and ends cranked down at 117 degrees 300mm long giving an outside measurement of 1080mm. There is a 10mm hole in each end 20mm in from the end. (this would be easier if I knew how to post a drawing)
Rear roll bar is a cranked shape this time 18mm diameter, centre length 880mm, cranked down each side at 115 degrees for 150mm then parallel with the top bar for 90mm, then cranked down at 90 degrees for 100mm. Overall width1290, internal 1270. The ends again have a 10mm dia hole to take a 50mm centre to centre drop link to the rear hub.
There is a picture of my rear anti roll bar in a previous post showing the end detail.
I have a front and rear going spare if anyone wants them freebies for collection.
Peter.


Sat Sep 16, 2017 11:13 pm
Profile E-mail
Admin, and Coupe Nutter
User avatar

Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1738
Location: In the workshop
GTM: Cox/Coupe
Post Re: Anti roll bars measurements
That is commitment Peter!

Very useful info will have to have a measure up.


Where about are you as could be interested in the front bar

Neil

_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod


Mon Sep 18, 2017 12:51 pm
Profile
Part built GTM

Joined: Mon May 03, 2010 10:56 pm
Posts: 145
GTM: K3
Post Re: Anti roll bars measurements
Hi Neil, Junction 30 M1 just before Sheffield.
Peter.


Mon Sep 18, 2017 4:55 pm
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.

phpBB SEO