It is currently Mon Mar 08, 2021 12:13 am




Post new topic Reply to topic  [ 356 posts ]  Go to page Previous  1 ... 20, 21, 22, 23, 24
Kano Coupe 
Author Message
On the Road
User avatar

Joined: Fri Sep 28, 2007 7:39 pm
Posts: 564
Location: Aberdeenshire
GTM: Cox/Coupe
Post Re: Kano Coupe
I may have some in my spares pile.

Is it the handle or the catch thats needed ?

_________________
Member No 1185


Mon Oct 12, 2020 9:29 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
Hi Ken its the catch, think you must have a secret hoard buried in your garden :D payment in Naira as before??
Thanks
John


Mon Oct 12, 2020 9:33 am
Profile E-mail
On the Road
User avatar

Joined: Fri Sep 28, 2007 7:39 pm
Posts: 564
Location: Aberdeenshire
GTM: Cox/Coupe
Post Re: Kano Coupe
Lucky the garage has a large attic, to hold perishable parts.
The heating oil tank is surrounded with wheels/tyres and body panels.

₦ 500 should cover the postage. :lol:

Let me look later

_________________
Member No 1185


Mon Oct 12, 2020 2:27 pm
Profile E-mail
On the Road
User avatar

Joined: Fri Sep 28, 2007 7:39 pm
Posts: 564
Location: Aberdeenshire
GTM: Cox/Coupe
Post Re: Kano Coupe
Image

This is the right hand side ?

_________________
Member No 1185


Mon Oct 12, 2020 3:27 pm
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
Hi Ken,
Yep that looks the 'right' one.
Would yo like to pm me a/c details so I can pay you? real money not Niara!!!
Regards
John


Tue Oct 13, 2020 6:22 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
After bonding in grp filler strips to the screen pillars and suspending the screen over the hole on webbing straps to adjust the size of the opening to suit, I now have a fitted "Dino" screen, but what a lot of faffing about, my shell was virgin unused, I would have thought the opening would be close to correct size, now we have an area about 10mm wide each side of the screen that will need paint touching up, wish I could buy matching paint colour rattle cans here I would have done it before fitting the screen.
John


Fri Oct 30, 2020 6:23 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
Ken you are naughty but nice :D :wink: :D


Wed Nov 04, 2020 12:13 pm
Profile E-mail
On the Road
User avatar

Joined: Fri Sep 28, 2007 7:39 pm
Posts: 564
Location: Aberdeenshire
GTM: Cox/Coupe
Post Re: Kano Coupe
Suspiciously wrapped parcels in the post ?

:lol:

_________________
Member No 1185


Wed Nov 04, 2020 12:23 pm
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
It could have been a Boko Haram bomb and we had to call in the bomb disposal squad.
Some time we will meet again for me to sort you out
Thanks
John


Wed Nov 04, 2020 12:53 pm
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
A big thank you to Ken Mr Naughty but Nice, his Boko Haram package with a door catch has arrived, another job to look at next Sunday. hope to meet up and buy you a burger at Forrestburn
Regards
John


Tue Nov 17, 2020 6:39 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 911
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Kano Coupe
I am seriously miffed :cry:
Have put the engine/rear subframe back just before Christmas thought it time to bleed brakes and clutch, topped up the pots and pressed the clutch peddle only for something to brake on the peddle box, lots of bad language and struggling to get head 1st down the footwell to remove the peddle box, thinking all the while why did I top the oil before checking and pressing a peddle??
The good news is it was not a weld that broke on my modification to convert to dual circuit/bias bar cylinders but an original B-L weld, the other positive is it did not fail far away from home driving on the road, anyway no progress and 3 steps backward, carried all the bits to work this morning to get it welded and strengthened.
John


Mon Jan 18, 2021 6:22 am
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 356 posts ]  Go to page Previous  1 ... 20, 21, 22, 23, 24


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.

phpBB SEO