Can anyone tell me what length the standard A series ignition leads are ie.
No. 1 =
No. 2 =
No. 3 =
No. 4 =

The coil will be different due to mounting positions, i want to get a set of comp ones made up for mine

Thanks

Andy, There are two different caps, straight and 90 degrees, i think the later ones are the 90 degrees.

Its the ignition lead lengths I'm looking for, I'm looking at changing to the 90 deg cap to give me a few more inches of room as well

Andy,
I'll have a look this afternoon for some leads to measure, i'm not sure if there are any kicking around as i've been clearing my Mini stuff out

Andy, I only found 1 set of leads, they were on a straight cap but they had a 90 degree connector on BOTH ends, all the leads were the same length, 12.5" (145mm) They were fitted so all of them pointed the same way, roughly towards no 4 cylinder.

ps I ca'nt see the degree symbol on my keyboard

unfortantly there is not one tim but rather than type degress all the time in forum speak it is quite acceptable to do this

90* this being the closest you can get

HTH
[Happy To Help]

WEST

I've heard that you can use the ° symbol, but only if you are a smart arse.

Hi, the leads just made for my car are 14"x2 & 17"x2 if thats any help, they are a bit on the long side but not overly long.

Yeah and now i ca'nt find a key for smart arse

Is this what you were looking for?

I reckon you cheated Tim , i know one way to do it but you have to have word open too


WEST

I didn't realize there were any rules.

Smoke and Mirrors Tim?

As my departments motto says

"Is est totus perfectus per fumi quod speculum"