 |
 |
 |
|
It is currently Tue Apr 21, 2026 11:11 pm
|
View unanswered posts | View active topics
  |
Page 1 of 1
|
[ 7 posts ] |
|
Interesting, R1 in a coupé
| Author |
Message |
|
Ken555
On the Road
Joined: Fri Sep 28, 2007 7:39 pm
Posts: 573
Location: Aberdeenshire
GTM: Cox/Coupe
|
 Interesting, R1 in a coupé Been talking to lynx racing and they've developed a cradle that enables an engine swap from the standard A series to R1. The main advantage is that as it is an engine swap without body/chassis modification in a Mini, so that would possibly allow it in the back on a Coupé. http://www.lynxae.co.uk/Developments-1.htm
_________________
Member No 1185
|
| Fri Jun 10, 2011 9:33 am |
  |
|
|
David Large
Ready for SVA
Joined: Sat Dec 19, 2009 8:48 am
Posts: 304
Location: Walsall, West Midlands
GTM: Cox/Coupe
|
Re: Interesting, R1 in a coupé I think the key dimension for fitting it in a coupe is the distance from the face of the rear bulkhead to the centre line of the driveshafts and the comparison with the dimensions under a mini bonnet, from the rear face of the grille to the driveshaft centre line again. I think that there is more room in a mini than in the back of a coupe.
David
_________________
Land Rover Freelander 2
GTM Coupe/Kawasaki track car - with Turbo attached and repaired/rebuilt engine
BRA 289 Cobra replica
Porsche 968 Coupe
Radical PR6
|
| Fri Jun 10, 2011 10:27 am |
|
|
|
minitici
Looking like a GTM
Joined: Sat Jul 26, 2008 9:45 am
Posts: 189
Location: Scotland [GTMOC 1190]
GTM: Cox/Coupe
|
Re: Interesting, R1 in a coupé I was looking on the Lynx-AE site yesterday and spotted their kit.
With a GTM the size of sprocket on the differential will not be limited by the proximity of the steering rack therefore a decent sized sprocket could be fitted.
(A notch would have to be taken out of the subframe at the back)
If you look at the pictures the sprocket fitted to the first car is tiny.
_________________
1967 Cox GTM; 1970 GTM Coupe, Lancia GTM Spaceframe , 1997 Rossa Mk2 (Two is never enough!)
|
| Fri Jun 10, 2011 11:13 am |
|
|
|
Weasel
GTM delivered
Joined: Thu Oct 15, 2009 12:15 am
Posts: 25
|
Re: Interesting, R1 in a coupé More power and less weight.
Sounds good in the video.
|
| Fri Jun 10, 2011 2:31 pm |
|
|
|
the other Tim
|
Re: Interesting, R1 in a coupé There's a Minus outside my workshop  
|
| Fri Jun 10, 2011 2:38 pm |
|
|
|
turbocox
Where is my Number Plate?
Joined: Mon Oct 01, 2007 7:25 pm
Posts: 974
Location: Near Milton Keynes
GTM: Cox/Coupe
|
Re: Interesting, R1 in a coupé Hmmm 2 minutes up the road.........I've been there before............... off work tomorrow............what shall I do with my time................ 
_________________
THE WORLD'S FASTEST 'A' SERIES COX GTM Standing 1/4 Mile in....13.502 @115mph MITP 08
|
| Fri Jun 10, 2011 5:16 pm |
|
|
|
the other Tim
|
Re: Interesting, R1 in a coupé turbocox wrote: Hmmm 2 minutes up the road.........I've been there before............... off work tomorrow............what shall I do with my time................ Sounds like a morning well spent  Twin R1 powered Coupe anyone 
|
| Fri Jun 10, 2011 8:06 pm |
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
|
