Got the rear bulkhead cover ready to go on, could do with some general interior pics to see how things are usually fitted and trimmed.

Main shots would be rear bulkhead and dashboard.

I haven't posted any of mine yet but the following zip file download has a mix of pics from the previous owner and a couple I just took this morning for you.

http://www.banes.org/interior.zip

This one is good;



I just took this one, shame I just put the hard top back on.



Can't see much but under the carpet appears to be the cover and a piece of wood that the carpet and speakers are fixed to. I'll have it all out in a few weeks to get the roll bar in and will take some more pics then.

Awesome, thanks for the pics give me and idea of whats what.

On a completely unrelated note what size wheels does your car have? 15"?

Yes 15" MGF wheels, the early type, but needed the arch extensions shown here.



I have a bit of a problem at the moment in that I can't get the ride height even back and front. I may go the individualisation route with the hydragas.

Hmm thats food for thought, i'm looking into wheel options. I've been looking into individulizing the spheres also, will make the engine bay/front end alot tidier and can but only improve the suspension.

There is another K3 owner on here that has cut and widened their arches, a bit extreme but probably a neat option if going for 15" Rover/MG wheels. Pics as well from memory.

Will have a search. How much do they stick out beyond the original arch profile? Would it not be possible to machine the wheels to change the offset?

I put a few photo's in a post titled 15" MGF wheels on a tight budget or something close to that, may give you an idea to how far out MGF wheels are and what I did.