Author |
Message |
octance
Part built GTM
Joined: Thu Jan 16, 2014 5:54 pm Posts: 128
|
Custom driveshafts
After having my shafts to machine up for 7 weeks the local machine shop has decided he is too busy to do them for me. Can anyone recomend anywhere to make a new set of custom shafts or somewhere which can machine down my donor shafts and make sleeves for me to TIG them up. Thanks
|
Wed Sep 03, 2014 10:49 pm |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Custom driveshafts
Hi Octance, try Jedi Race cars, they have made for them Mini based shafts (but stronger) that are a custom length, speak to John corbyn on 01933 440774 John
|
Thu Sep 04, 2014 5:05 am |
|
|
gtmdriver
On the Road
Joined: Tue Oct 30, 2007 8:44 am Posts: 632 Location: Chester le Street
|
Re: Custom driveshafts
CPS Drivelink in Gateshead can shorten, lengthen or fabricate new driveshafts from scratch and they can make uprated versions too.
_________________ GRP rules!
|
Thu Sep 04, 2014 10:14 am |
|
|
octance
Part built GTM
Joined: Thu Jan 16, 2014 5:54 pm Posts: 128
|
Re: Custom driveshafts
Thanks CPS want £295 a shaft Jedi race cars want £195 a shaft and sounded interested in the project too so going to get them to do it. More expensive than i thought
|
Sat Sep 06, 2014 4:31 pm |
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm Posts: 1762 Location: In the workshop GTM: Cox/Coupe
|
Re: Custom driveshafts
Oh yes shafts are not cheap, especially custom ones mine are Allspeed engineering off the shelve ones for their Mini conversions, at about £330 a set plus on top the custom cvs which are about £105 each! Plus VAT! On the positive side at least I know they are up to the job and have taken a lot of abuse so far.
neil
_________________ IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
Sat Sep 06, 2014 7:36 pm |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Custom driveshafts
The Mini based shafts Jedi have made for thier race cars have to cope with up to 200bhp 1000cc bike engines using 10" slicks so should be more than man enough for anything thrown at them with an A series engine John
|
Sun Sep 07, 2014 4:20 am |
|
|
ibrooks
Looking like a GTM
Joined: Mon Feb 04, 2008 5:41 pm Posts: 210 Location: Darwen, Lancashire
|
Re: Custom driveshafts
Late to the conversation and it sounds like the OP is sorted but another useful name to add to the list for anyone looking for similar. http://www.broadoakgears.com/They recently made me a set of shafts to connect a Micra engine to Mini CV joints. Iain
|
Mon Sep 08, 2014 11:53 am |
|
|