It is currently Sat Mar 23, 2019 4:57 pm




Post new topic Reply to topic  [ 3 posts ] 
Oops! 
Author Message
GTM on order

Joined: Mon Oct 26, 2015 6:57 pm
Posts: 6
GTM: Rossa
Post Oops!
I made a bit of an error today. I tried to do some work on the rear brake lines (which are a pain BTW), I took the whole rear boot section off for better access. Then a surprisingly strong gust came along and blew the boot section across the car park damaging one of the rear light clusters. After this I could see this wind was getting worse, so I gave up on work and quickly refitted the boot, in doing so I picked up the wrong bolt for the left rear turret, fired it in with an impact driver and realised I had just destroyed the rear captive nut... :oops:

I would have been better off staying in bed!

Anyway, could I use a pair of seat belt captive plates with appropriate bolts as a replacement?

And as I don't seem to have any access holes to get in those turrets, aside from the ones behind the seat, but that's a bit far to reach from. Can I drill 120mm holes in the to like I have seen on other cars?

Thanks

John


Attachments:
12486080_10156410800600237_7897350522196235137_o.jpg
12486080_10156410800600237_7897350522196235137_o.jpg [ 277.31 KiB | Viewed 2450 times ]
Fri Jan 29, 2016 5:49 pm
Profile E-mail
On the Road

Joined: Tue Jun 17, 2008 9:11 pm
Posts: 671
Post Re: Oops!
Oops indeed :roll: Your ideas are fine. I cut holes in the buttresses on my car and they're essential for access because mine doesn't have captive nuts fitted. I just use nuts and bolts with large penny washers and I fitted access hatch covers meant for a boat in the holes to prevent water from finding its way in - I got these from eBay and I can't remember the exact size offhand but they are around 100/120mm.

_________________
Education is important.
Cars are importanter.


Fri Jan 29, 2016 8:29 pm
Profile E-mail
Looking like a GTM

Joined: Thu Nov 04, 2010 11:09 pm
Posts: 246
Location: south yorkshire
GTM: Rossa
Post Re: Oops!
Attachment:
11903567_1031380006885934_480792062_n.jpg
11903567_1031380006885934_480792062_n.jpg [ 79.24 KiB | Viewed 2406 times ]
Oh no bad look, take a look at Alans car and how he fitted a quick release boot, could even thread a wire through them for extra piece of mind, I think he is on this forum but if not he is on the gtm page on facebook.


Attachments:
ross2.jpg
ross2.jpg [ 113.57 KiB | Viewed 2406 times ]
Sat Jan 30, 2016 10:10 am
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.

phpBB SEO