£1400?
I think i'l go with plan "A", a pillow strapped to the top of my head with an elastic band.
......or roof wheels
| GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
| Roll Cage http://www.gtmdrivers.com/forum/roll-cage-t1430.html |
Page 1 of 2 |
| Author: | Coupe177C [ Tue Sep 21, 2010 7:54 pm ] |
| Post subject: | Roll Cage |
Has anyone got a roll cage in their coupe? I think i would be a lot happier with one..... Just incase! Is there room for one? Can you fit one in there thats built for another car? |
|
| Author: | David Large [ Tue Sep 21, 2010 10:46 pm ] |
| Post subject: | Re: Roll Cage |
I have an FIA roll cage in my car which is a track car. I know it cost about £1400, I have the invoice which came with the car when I bought it. Regards David |
|
| Author: | Coupe177C [ Wed Sep 22, 2010 8:28 am ] |
| Post subject: | Re: Roll Cage |
£1400? I think i'l go with plan "A", a pillow strapped to the top of my head with an elastic band. ......or roof wheels
|
|
| Author: | CamelotR [ Wed Sep 22, 2010 10:25 am ] |
| Post subject: | Re: Roll Cage |
1400 is for a full FIA roll cage. A road safety device must be cheaper. |
|
| Author: | David Large [ Wed Sep 22, 2010 7:14 pm ] |
| Post subject: | Re: Roll Cage |
Agreed. |
|
| Author: | Coupe177C [ Wed Sep 22, 2010 9:50 pm ] |
| Post subject: | Re: Roll Cage |
Just found this after a search... http://www.gtmdrivers.com/forum/post4800.html?hilit=roll#p4800 A very nice looking job. Wonder if my old man will have the patience to fabricate something like that. Or I could get a few miles of tube and try it myself. Which reminds me, I must learn to weld. 
|
|
| Author: | suttymini [ Thu Sep 30, 2010 11:22 am ] |
| Post subject: | Re: Roll Cage |
How many owners would like a roll cage ? if we a club together, and get some made to bolt in ,could be cheaper than doing one by one . thanks |
|
| Author: | Mr Mac [ Thu Sep 30, 2010 8:21 pm ] |
| Post subject: | Re: Roll Cage |
I'd quite like a front hoop that could be bolted in and would brace to the standard rear roll bar via some bolt in/clamp on roof bars - can't see that being more than a couple of hundred at the most. David |
|
| Author: | Mr Mac [ Thu Sep 30, 2010 8:24 pm ] |
| Post subject: | Re: Roll Cage |
Useful....... http://www.ppcages.com/displayimg.php?u ... in/001.jpg |
|
| Author: | West [ Thu Sep 30, 2010 9:32 pm ] |
| Post subject: | Re: Roll Cage |
That would be David large's Car, or as I know it a friends old car, Neil |
|
| Author: | David Large [ Fri Oct 01, 2010 7:09 am ] |
| Post subject: | Re: Roll Cage |
Correct - we are back to £1400. David |
|
| Author: | the other Tim [ Fri Oct 01, 2010 8:20 pm ] |
| Post subject: | Re: Roll Cage |
David Large wrote: Correct - we are back to £1400. David Maybe not. A couple of years ago i had a chat with Performance Protection at Race Retro and told them i did'nt want spend that much on a cage for a Coupe. The guy did offer to supply all or some of the parts preformed for me to weld in. Could be worth a phone call. |
|
| Author: | David Large [ Sat Oct 02, 2010 6:23 am ] |
| Post subject: | Re: Roll Cage |
In the current economic climate I have no doubt that there are all sorts of deals to be done. I have actually just dug out the invoice and my memory is not so good - the roll cage was fitted in June 2008 and it is described as "6 point internal cage for GTM Coupe - PP700 - bare steel" cost £1,008.15 including VAT. regards David |
|
| Author: | Mr Mac [ Sat Aug 04, 2012 1:50 pm ] |
| Post subject: | Re: Roll Cage |
Is anybody interested still in a joint purchasing of roll cages? |
|
| Author: | mayoturbo [ Sat Aug 04, 2012 1:54 pm ] |
| Post subject: | Re: Roll Cage |
I have most of a cage for the coupe. No idea where it was made. missing a bar which goes across the back and one door bar. |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
