Coupe engineering drawings
Author |
Message |
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Coupe engineering drawings
Hi has anybody got a set of coupe chassis/body dimensioned drawings with enough info to start making a chassis? john
|
Fri Feb 07, 2014 3:00 pm |
|
|
gtmdriver
On the Road
Joined: Tue Oct 30, 2007 8:44 am Posts: 632 Location: Chester le Street
|
Re: Coupe engineering drawings
I've got one or two but by no means a full set.
You're welcome to a copy of what I have.
_________________ GRP rules!
|
Fri Feb 07, 2014 7:49 pm |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Coupe engineering drawings
Hi Driver, please mail me to jtbunting44@yahoo.co.uk, lets see if I can get started John
|
Sat Feb 08, 2014 4:34 am |
|
|
gtmdriver
On the Road
Joined: Tue Oct 30, 2007 8:44 am Posts: 632 Location: Chester le Street
|
Re: Coupe engineering drawings
Done.
_________________ GRP rules!
|
Sat Feb 08, 2014 10:09 am |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Coupe engineering drawings
Many thanks now for a little weekend study John
|
Sat Feb 08, 2014 10:12 am |
|
|
Steve Shield
Ready for SVA
Joined: Tue Sep 09, 2008 4:46 pm Posts: 302
|
Re: Coupe engineering drawings
John, You have a PM Regards, Steve
|
Sat Feb 08, 2014 3:56 pm |
|
|
gtmdriver
On the Road
Joined: Tue Oct 30, 2007 8:44 am Posts: 632 Location: Chester le Street
|
Re: Coupe engineering drawings
Actually I don't.
Give it another try.
_________________ GRP rules!
|
Sat Feb 08, 2014 5:22 pm |
|
|
Steve Shield
Ready for SVA
Joined: Tue Sep 09, 2008 4:46 pm Posts: 302
|
Re: Coupe engineering drawings
Gtmdriver it was to the other John. Sorry for the confusion! Steve
|
Sun Feb 09, 2014 2:36 pm |
|
|
David Large
Ready for SVA
Joined: Sat Dec 19, 2009 8:48 am Posts: 304 Location: Walsall, West Midlands GTM: Cox/Coupe
|
Re: Coupe engineering drawings
kano nordie wrote: Hi has anybody got a set of coupe chassis/body dimensioned drawings with enough info to start making a chassis? john John, When you say a chassis, do you mean the steel tub or are you talking about a tubular spaceframed chassis? David
_________________ Land Rover Freelander 2 GTM Coupe/Kawasaki track car - with Turbo attached and repaired/rebuilt engine BRA 289 Cobra replica Porsche 968 Coupe Radical PR6
|
Sun Feb 09, 2014 5:31 pm |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Coupe engineering drawings
It was to make a space frame with integral roll cage
|
Mon Feb 10, 2014 4:39 am |
|
|
David Large
Ready for SVA
Joined: Sat Dec 19, 2009 8:48 am Posts: 304 Location: Walsall, West Midlands GTM: Cox/Coupe
|
Re: Coupe engineering drawings
I like the idea of that.
David
_________________ Land Rover Freelander 2 GTM Coupe/Kawasaki track car - with Turbo attached and repaired/rebuilt engine BRA 289 Cobra replica Porsche 968 Coupe Radical PR6
|
Mon Feb 10, 2014 8:10 am |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Coupe engineering drawings
The twinny Mini I built here in Kano used the roll cage in the back to carry the rear subframe as there was just a big hole where the rearseat and boot floor used to be, so its just an extension of that idea and if possible remove the sub frames as well using coilsprung suspension John
|
Mon Feb 10, 2014 9:21 am |
|
|
David Large
Ready for SVA
Joined: Sat Dec 19, 2009 8:48 am Posts: 304 Location: Walsall, West Midlands GTM: Cox/Coupe
|
Re: Coupe engineering drawings
My Kermit car is spaceframed at the back and sort of modified at the front but still uses the heavy tub in the centre. It weighs a total (with everything except me) of 600kg which is light but not light enough.
Will you be getting this chassis built in the UK or overseas?
David
_________________ Land Rover Freelander 2 GTM Coupe/Kawasaki track car - with Turbo attached and repaired/rebuilt engine BRA 289 Cobra replica Porsche 968 Coupe Radical PR6
|
Mon Feb 10, 2014 10:55 am |
|
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am Posts: 967 Location: Kano north Nigeria GTM: Cox/Coupe
|
Re: Coupe engineering drawings
Most probably make it here as I did with the Twinny roll cage, shiping things back can be very costly and often goes wrong with our greedy thieving customs, who believe bribery and corruption is the way to go I am looking at a space frame that could be adapted and weighs 115Kg but still negotiating transport and clearing this end. After my November shipment stuck in port "still" all I have is my 2 x 14 twinny donor car john
|
Mon Feb 10, 2014 11:07 am |
|
|
littlearmy1987
GTM delivered
Joined: Tue Dec 04, 2012 2:39 pm Posts: 24 Location: cheshire GTM: Cox/Coupe
|
Re: Coupe engineering drawings
i have the drawings that i made over last 3years from measurments of a 1.3
|
Thu Feb 13, 2014 6:07 pm |
|
|