Following our brief presentation at the AGM Bob has suggested that we provide an update on the Coupe project via the forum.
Many will remember that Peter Leslie bought the project in 1995 and re-branded it Primo Cars. Peter did a lot of work to modify the car for SVA -- relocating the headlights, safety column etc plus some mods to the engine cover for more clearance around the carb/air cleaner.
Peter built a car to this specification, which we own, but did not get round to changing any of the moulds. After Peter passed away Mrs Leslie kept the project in dry storage for many years until she felt that she could sell it on. In 2012 we bought the whole project including the moulds, jigs, tools, and intellectual property. Our intention in doing so was to supply parts to owners of Coupes so that we can keep as many cars a possible on the road. To that end we are currently in a position to supply parts for the 13" wheel car as follows:
Exterior Panels
Supplied in grey gelcoat -- a colour match is virtually impossible -- requiring flash removal and some minor preparation before paint. The bonnet is supplied with the hinge panel incorporated and will require the rear edge trimming to suit the doors. The engine cover has some minor surface issues that won't polish out of the mould and will require slightly more preparation.
Interior Panels
Supplied in matt black gelcoat with the "vinyl" effect and will require minor flash removal
Chassis Tub
Supplied in grey primer finish will require sealing prior to paint
Windscreens
We are currently in discussion with the original supplier for clear laminated windscreens but will need to order 5+
Wiring Looms
From the original supplier with connectors to suit the Triumph column. Again we need to order 5+
In addition to the above we would be open to any suggestions from Coupe owners as to parts they need -- examples might be repair panels for the tub, sections of the body panels, side window glass etc. We have the drawings for all of the metal components so re-manufacture of the entire kit is possible.
As mentioned in another post we are in discussions to access a Cox version of the car so if there's sufficient interest we might be able to supply parts for 10" wheel cars in the future -- historic racer anyone?
A price list is available -- all prices are ex-works assuming collection from Colchester Essex -- delivery by individual negotiation -- and include VAT.
Contact as follows:
Phone 01206 331546
Mobile 07762915910
steve.shield@debouclier.comor PM via the forum
Steve Shield
De Bouclier Limited
