It is currently Mon Nov 16, 2026 8:18 pm




Post new topic Reply to topic  [ 121 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next
Shudders when enginebraking 
Author Message
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
The top arms run in needle roller bearings and if grease should have a long life but because the don't move very much up and down can wear a groove in the pins, if you can find any sign of movement forward and backward it's time to replace, rebuild kits are available but knocking the roller bearings out can be a but tricky.
Think Super Max got over excited last weekend and became "Mad Max"
John


Thu Sep 01, 2016 7:47 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
I will check them next weekend.

Max wanted a good result in front of his many Dutch fans, but screwed up his start. I liked his defensive actions :D


Thu Sep 01, 2016 8:10 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
I think Red Bull Liked his actions, Ferrari drivers not so much, lets see how he does next weekend
John


Thu Sep 01, 2016 8:21 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Haha, again mainly Kimi and Max were fighting, don't think they will become best friends...
Next race is in Italy right? Don't think Max has many fans there... would be nice to finish in front of the Ferrari's :lol:


Thu Sep 01, 2016 8:48 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
If he keeps his cool he as has every chance :wink:
John


Thu Sep 01, 2016 8:50 am
Profile E-mail
Ready for SVA

Joined: Tue Sep 09, 2008 4:46 pm
Posts: 311
Post Re: Shudders when enginebraking
Harold,

I could come up with some bullsh*t but I honestly don't know -- Ford overcame its wheel vibration problems -- an epidemic with Rostyles -- by spigoting the wheel to the hub. Every one does that now -- eg see metro hubs.

Steve


Fri Sep 02, 2016 8:38 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Hi Steve, I would guess spigots to centralise the wheels better to reduce run-out/vibration?? that was my thought for raising the car and rolling the wheels to see any run-out
John


Fri Sep 02, 2016 8:59 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
I have thought about my fitted old Alleycat wheels too.
Because the old nuts were bad I bought new ones (with radius) without really knowing what kind of nuts the wheels would require.
Maybe other nuts would centralise the wheel better? I thought wheelnuts with radius centralise best?!
Must find someone who knows which nuts I need (No not that ones).

Somehow this seems more likely to me to cause the vibrations/Judders than the lower-arm-issues

Harold


Fri Sep 02, 2016 10:04 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
And having improved the bushing situation the problem is now at a higher speed, which make me to think the bushings and joints are not the problem.
John


Fri Sep 02, 2016 10:12 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Does "Alleycat" still produce wheels?
Can't find a manufacturer sofar.
If I want new 13" wheels in the future, what sizes am I limited too? 6x13 with 165/60 tires? and what offset? Won't 175/50 tires fit? Too wide?

Harold


Fri Sep 02, 2016 10:54 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
I used to run 175-50 on 13"x6" when racing on my old Cox that was made for 10" wheels, so should be no problem on later cars made for 13' wheels.
John


Fri Sep 02, 2016 11:02 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Thanks John,
Do you have an idea what offset I shoould have?
Or will all 6x13" wheels that are advertised on mini-parts-websites fit?

Harold


Fri Sep 02, 2016 11:08 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Hi Harold, Its too long ago (early 1980's)for me to remember the offset, I did have to use extended arches to keep the race scrutineers happy, the revolution wheels I used were intended for Mini's if that helps.
John


Fri Sep 02, 2016 11:45 am
Profile E-mail
Looking like a GTM
User avatar

Joined: Thu Sep 10, 2015 7:54 am
Posts: 229
Location: Uden (Holland)
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
I just jacked my car up, and when I turn the wheels I see quite a bit of tire-hight-difference on all 4 wheels.
Maybe I should inflate the tires to a too high pressure (2,5 bar?), Jack it up and put blocks under the car so the wheels don't touch the ground when I don't drive it, see if that helps.

Harold


Sat Sep 03, 2016 10:48 am
Profile E-mail
On the Road

Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
Post Re: Shudders when enginebraking
Ho Harold,
That is what I had been thinking was the problem, I had flat spots on the tyres of my race car from where it was stored in the trailer, it almost shook the teeth out of my fillings :wink: now I store the car with wood blocks under the corners of the chassis.
John


Sat Sep 03, 2016 11:13 am
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 121 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.

phpBB SEO