Author |
Message |
peewee1363
GTM delivered
Joined: Wed Jan 09, 2019 11:27 pm Posts: 11 Location: Stockport GTM: K3
|
New arrival
And so it begins..... Thanks to Brian (techead) for letting me take this away! So, engine is seized, subframes ready for blasting and powder coat!
Attachments:
P_20201125_152035.jpg [ 269.73 KiB | Viewed 2824 times ]
P_20201125_152025.jpg [ 222.56 KiB | Viewed 2824 times ]
|
Wed Nov 25, 2020 9:54 pm |
|
|
catsam
Ready for SVA
Joined: Thu Jun 27, 2013 11:32 pm Posts: 492 Location: Norfolk GTM: Libra
|
Re: New arrival
Hi peewee1363 and welcome Looks like you have a lot work on your hands love the silver colour You say the engine is seized whats your plans for the engine i have a rover 1.6 with gearbox and ecu 5as alrm and wireing lom was runing before I removed it from my car its just siting in my work shop
_________________ I cannot guarantee against unauthorized modifications or improper use of this information I assume no liability for property damage or injury incurred as a result of any of the information contained in this I recommend safe practices
|
Thu Nov 26, 2020 6:13 am |
|
|
techead
Part built GTM
Joined: Tue Feb 23, 2016 11:14 pm Posts: 52
|
Re: New arrival
The journey has started, You have managed more than I did in the years I had the kit. Looking forward to following the build. The engine did turn over when I got the kit. It might be worth oiling the bores and they might free up. As I was planning on an electric drive system I didn`t pay much attention to the engine, which is a shame as the previous owner said the engine was a good one.
|
Thu Nov 26, 2020 11:14 am |
|
|
Phil.1380
Part built GTM
Joined: Mon Oct 19, 2020 7:27 pm Posts: 64 Location: Lincoln, UK. GTM: Libra
|
Re: New arrival
Looks like a great project !!
Keep us posted with progress.
Phil.
|
Fri Nov 27, 2020 1:18 pm |
|
|
peewee1363
GTM delivered
Joined: Wed Jan 09, 2019 11:27 pm Posts: 11 Location: Stockport GTM: K3
|
Re: New arrival
Hi Brian, the bores are a ittle too far gone in my opinion but fortunately we have alternatives, thank you to everyone who has offered help but I believe we've got most of what is needed! Cheers Pete.
|
Tue Dec 01, 2020 9:17 pm |
|
|
peewee1363
GTM delivered
Joined: Wed Jan 09, 2019 11:27 pm Posts: 11 Location: Stockport GTM: K3
|
Re: New arrival
Bolted some mgf subframes together so I can roll the shell around. Still some refurb of the frame struts etc to do but there coming off again when the body is ready for paint!
|
Thu Dec 10, 2020 6:38 pm |
|
|
catsam
Ready for SVA
Joined: Thu Jun 27, 2013 11:32 pm Posts: 492 Location: Norfolk GTM: Libra
|
Re: New arrival
Hi nice bule subframe what colour are you doing the body I have not seen a k3 striped down like this. In the photos you can just see the dash. is it like a bolt in part or is it part of the tub and you have to cover it in place or can you cover it then fit to the car i ask because my car,s dash needs some work but it looks like i will have to take out the windscreen to cover the dashboard thanks paul
_________________ I cannot guarantee against unauthorized modifications or improper use of this information I assume no liability for property damage or injury incurred as a result of any of the information contained in this I recommend safe practices
|
Fri Dec 11, 2020 8:03 am |
|
|
peewee1363
GTM delivered
Joined: Wed Jan 09, 2019 11:27 pm Posts: 11 Location: Stockport GTM: K3
|
Re: New arrival
Hi Paul, the dash has been chopped around quite a lot, the windscreen will also be coming out as the bonding is perished! I think the silver really suits the car so at the moment I think it will stay silver with perhaps a little contrasting gunmetal grey wheels and mirrors. I am fortunate in that I have collected many rover/MG parts over the years and thanks to Brian I have plenty of parts for the K3, so I have,plenty of options to think about.
|
Fri Dec 11, 2020 8:09 pm |
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm Posts: 1762 Location: In the workshop GTM: Cox/Coupe
|
Re: New arrival
Lots of parts,,,,I spy a yellow K3 in the garage
_________________ IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
Sat Dec 12, 2020 12:33 pm |
|
|