| Author |
Message |
|
minitici
Looking like a GTM
Joined: Sat Jul 26, 2008 9:45 am
Posts: 189
Location: Scotland [GTMOC 1190]
GTM: Cox/Coupe
|
 Re: Boot lids Early Cox GTMs had a one piece boot lid not dissimilar to the ones being manufactured in this thread. They were constructed with a foam core for rigidity.  This is my 1967 Cox boot lid - as you can see it has had a few extra cut-outs over the years. Yes, the later two piece lids fit the early openings.
_________________
1967 Cox GTM; 1970 GTM Coupe, Lancia GTM Spaceframe , 1997 Rossa Mk2 (Two is never enough!)
|
| Thu Oct 16, 2008 1:49 pm |
  |
 |
|
Tim Rowe (1130)
The Terrible Tims
Joined: Fri Sep 28, 2007 7:56 pm
Posts: 747
Location: In the garage,Sileby, LEICS
GTM: Cox/Coupe
|
Re: Boot lids Andy wrote: Tim, I think I will be OK for that boot lid, I had a go myself as I kinda figured your one as good as it would be would end up too expensive with shipping costs, the end result is not bad. Thanks for the offer though  No worries Andy. My mate who has got the pattern is back from his holiday at the weekend, so we should have a bit more progress soon.
_________________
Tim Rowe
"Is est totus perfectus per fumi quod speculum"
|
| Thu Oct 16, 2008 4:35 pm |
|
|
|
Henry
Site Admin
Joined: Fri Apr 13, 2007 5:42 am
Posts: 37
Location: Devon
|
Re: Boot lids I always found the two part boot lid rather annoying, so I do like this idea. I have no idea how I would match the green paint though  I'd like to take it a step further and go for a fully hinged boot, a la lotus elise: 
|
| Fri Oct 24, 2008 9:11 pm |
|
|
|
rooster
GTM delivered
Joined: Mon Nov 05, 2007 7:23 pm
Posts: 46
Location: north east, durham
|
Re: Boot lids personally (no offence meant to anyone) but i like the 2 piece bootlids, i think its makes the gtm "what it is" i like the fact you can just open the back half lol!  must only be me though......
|
| Mon Oct 27, 2008 9:24 pm |
|
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1769
Location: In the workshop
GTM: Cox/Coupe
|
Re: Boot lids I like two piece too find it practical WEST
_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
| Mon Oct 27, 2008 9:41 pm |
|
|
|
Tim Rowe (1130)
The Terrible Tims
Joined: Fri Sep 28, 2007 7:56 pm
Posts: 747
Location: In the garage,Sileby, LEICS
GTM: Cox/Coupe
|
Re: Boot lids I think that the hinge could be done, but would need a bit of investigation, to make sure that the lid didn't foul on the tub when it was lifted or lowered. This would happen with a normal hinge, but I'm sure it can be done.
The whole idea of the one piece boot lid is for clearance for the carb or plenum, which always fouled with the standard one.
_________________
Tim Rowe
"Is est totus perfectus per fumi quod speculum"
|
| Tue Oct 28, 2008 9:07 am |
|
|
|
BF
GTM delivered
Joined: Fri Nov 02, 2007 1:21 pm
Posts: 19
|
Re: Boot lids Tim
Are we any closer to getting an estimate for this? I am moments away from cutting a section out of my bootlid to get it to fit..............shall i resist or go for it???
First MOT attempt (failure) looming, just wing mirrors and boot lid to fit!!!
Cheers
BF
|
| Thu Nov 13, 2008 1:45 pm |
|
|
|
sprintmini
GTM delivered
Joined: Wed Mar 11, 2009 10:31 pm
Posts: 38
|
Re: Boot lids Sorry guys just found this thread after I had posted my previous post.
Are these available?
|
| Thu Sep 10, 2009 8:23 am |
|
|
|
Tim Rowe (1130)
The Terrible Tims
Joined: Fri Sep 28, 2007 7:56 pm
Posts: 747
Location: In the garage,Sileby, LEICS
GTM: Cox/Coupe
|
Re: Boot lids Will be. Just need to the time to get them sorted. My mate who is sorting the plug for the mold has made good progress on it. I'll have a word with him at the weekend and give him a nudge, as he's at his last hillclimb/sprint of the year, so he should have some more spare time soon. http://www.gosprinting.co.uk/docs/Thor09_Regs_A5.pdf I'll be there on the Saturday.
_________________
Tim Rowe
"Is est totus perfectus per fumi quod speculum"
|
| Thu Sep 10, 2009 8:58 am |
|
|
|
Pantera2075
On the Road
Joined: Fri Oct 12, 2007 9:38 am
Posts: 740
Location: Stoke
|
Re: Boot lids I now have a similar concern:
Attachments:
DSC00557.JPG [ 285.99 KiB | Viewed 7798 times ]
_________________
GTM Libra, GTM Coupe, Siva Moonbug, GMC Safari And DeTomaso Pantera.
|
| Thu Sep 10, 2009 10:51 am |
|
|
|
turbocox
Where is my Number Plate?
Joined: Mon Oct 01, 2007 7:25 pm
Posts: 974
Location: Near Milton Keynes
GTM: Cox/Coupe
|
Re: Boot lids Looks fine to me  . what kind of thing are you after?
_________________
THE WORLD'S FASTEST 'A' SERIES COX GTM Standing 1/4 Mile in....13.502 @115mph MITP 08
|
| Thu Sep 10, 2009 6:08 pm |
|
|
