GTM Owners Club Forum http://www.gtmdrivers.com/forum/ |
|
Paul's libra http://www.gtmdrivers.com/forum/paul-s-libra-t4679-30.html |
Page 3 of 7 |
Author: | sanzomat [ Thu Dec 30, 2021 1:22 pm ] |
Post subject: | Re: Paul's libra |
catsam wrote: https://www.ebay.co.uk/itm/383847922285 Not tried that one but others have said it works and definitely a simple solution if it does. I think I already mentioned I went with some chunky power resistors but basically the same thing. |
Author: | catsam [ Sun Mar 06, 2022 8:37 pm ] |
Post subject: | Re: Paul's libra |
I have started to strip down the back suspension I have taken the gaz suspension off and sent it back with the front ones for service and fitted a bar to stop it from collapsing I need to take the top ball joint off the hub I have read that this can be very tight so got one of these (46mm Slogging Ring Spanner Box End Striking Wrench ) I will give it a go and see how it works the hub and the top ball joint are off the car and the slogging spanner worked very well |
Author: | sidewinder [ Sun Mar 06, 2022 8:43 pm ] |
Post subject: | Re: Paul's libra |
FYI, might be adaptable for your spanner. post19506.html |
Author: | catsam [ Sun Mar 06, 2022 9:00 pm ] |
Post subject: | Re: Paul's libra |
i like your solution for the spanner slipping from the nut download/file.php?id=1346 |
Author: | Spider [ Sun Mar 06, 2022 11:09 pm ] |
Post subject: | Re: Paul's libra |
Yeah good tip - thanks. |
Author: | West [ Mon Mar 07, 2022 1:10 pm ] |
Post subject: | Re: Paul's libra |
catsam wrote: Looks a fairly stiff set up there giving a spring rate of infinity/inch |
Author: | catsam [ Sun Mar 20, 2022 5:23 pm ] |
Post subject: | Re: Paul's libra |
I have made some new brackets for the brake lines out of some stainless-steel |
Author: | sidewinder [ Sat Mar 26, 2022 7:19 pm ] |
Post subject: | Re: Paul's libra |
Label everything! |
Author: | catsam [ Sat Jun 04, 2022 6:48 am ] |
Post subject: | Re: Paul's libra |
Page 3 of 7 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |