| Author |
Message |
|
Martyn
GTM on order
Joined: Fri Apr 03, 2020 11:40 am
Posts: 2
|
 Chassis/floorpan Hi. I'm new to the foram and would first like to say hello and hope everyone is keeping safe in these strange times
While I have all this free time I've been tidying my workshops and came across this. I believe it's a Cox GTM floor pan, I've placed it on here to see if it's of use to anyone before I scrap it
Thanks and keep safe
|
| Mon Apr 06, 2020 11:27 am |
  |
 |
|
kano nordie
On the Road
Joined: Wed Jul 31, 2013 11:47 am
Posts: 967
Location: Kano north Nigeria
GTM: Cox/Coupe
|
Re: Chassis/floorpan Hi Martyn,
I'm sure your chassis will be of interest, but 1st off you need to identify, early Cox GTM's had the rear chassis legs made from welded up sheet steel, later GTM's had a square tube fabricated frame to fit the "front" subframe.
Regards
John
|
| Tue Apr 07, 2020 7:01 am |
|
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1767
Location: In the workshop
GTM: Cox/Coupe
|
Re: Chassis/floorpan HI Martyn and welcome,
If you can post a picture we can help identify it, also where about are you?
Neil
_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
| Tue Apr 07, 2020 11:01 am |
|
|
|
Martyn
GTM on order
Joined: Fri Apr 03, 2020 11:40 am
Posts: 2
|
Re: Chassis/floorpan Hi all
The tub l have is the one square tube front frame, I've taken a photo but not shure how to upload it , but I could send it by email or WhatsApp, my location is Crofton which is about 5 miles from M1 junction 39 or 41
Martyn
|
| Wed Apr 08, 2020 11:06 pm |
|
|
|
Phaeton
Looking like a GTM
Joined: Sat Apr 08, 2017 3:08 pm
Posts: 171
Location: Worksop
|
Re: Chassis/floorpan Easiest way I find is to upload to https://imgbb.com/ then copy/paste the link, just make sure you make your image Public
|
| Thu Apr 09, 2020 6:27 pm |
|
|
|
West
Admin, and Coupe Nutter
Joined: Fri Sep 14, 2007 10:34 pm
Posts: 1767
Location: In the workshop
GTM: Cox/Coupe
|
Re: Chassis/floorpan Martyn's chassis. Attachment: 
Chassis.jpg [ 229.25 KiB | Viewed 3597 times ]
It looks to be a 80 chassis i.e 13 inch wheel.  Neil
_________________
IF wile e coyote had a GTM he would have one with Nitrous too! watch out road runner! The First GTM into the 11s then the 10s, PB 10.87 @ 125.5 Mph on A048 tyres, and fully road legal at Santa Pod
|
| Fri Apr 10, 2020 9:28 am |
|
|
|
derek hambly
Part built GTM
Joined: Sat Nov 09, 2013 8:17 pm
Posts: 54
GTM: Cox/Coupe
|
Re: Chassis/floorpan Hi Martyn,
I am interested in the floorpan.
I have sent you an e'mail.
regards
Derek Hambly
|
| Fri Apr 10, 2020 2:17 pm |
|
|
